P1361 – Acura DTC

Acura DTC P1361 – TDC Sensor Intermittent Interruption

DTC P1361 meaning on Acura

DTC P1361 on an Acura indicates an intermittent interruption in the signal from the Top Dead Center (TDC) sensor. The TDC sensor is crucial for the engine control module (ECM) to determine the ignition timing and fuel injection timing.

Acura DTC P1361 symptoms

Symptoms of DTC P1361 on an Acura may include:

• Check Engine Light (CEL) illuminated
• Engine may run rough or misfire
• Reduced engine performance
• Difficulty starting the engine

Acura DTC P1361 causes

Common causes of DTC P1361 on an Acura include:

• Faulty TDC sensor
• Wiring or connector issues in the TDC sensor circuit
• ECM software or hardware problems

Acura DTC P1361 seriousness

DTC P1361 should not be ignored as it can lead to poor engine performance and potential drivability issues. Ignoring this code may result in further damage to the engine components.

How to diagnose DTC P1361 on Acura

To diagnose DTC P1361 on an Acura, follow these steps:

1. Use an OBD-II scanner to retrieve the trouble codes.
2. Inspect the TDC sensor and its wiring for any visible damage.
3. Check the TDC sensor signal using a multimeter.
4. Inspect the ECM for any signs of malfunction.

How to fix DTC P1361 on Acura

To fix DTC P1361 on an Acura, consider the following:

1. Replace the faulty TDC sensor if it is found to be defective.
2. Repair any damaged wiring or connectors in the TDC sensor circuit.
3. If the ECM is faulty, consider reprogramming or replacing it.

How to erase DTC P1361 on Acura

To erase DTC P1361 on an Acura:

1. Use an OBD-II scanner to clear the trouble codes.
2. After fixing the underlying issue, clear the codes again to ensure they do not reappear.