P1758 – Acura DTC

Acura DTC P1758 – Automatic Transaxle

DTC P1758 meaning on Acura

The Diagnostic Trouble Code (DTC) P1758 in an Acura refers to an issue with the automatic transaxle. Specifically, it indicates a problem with the A/T Clutch Pressure Control Solenoid Valve B circuit.

Acura DTC P1758 symptoms

Symptoms of DTC P1758 in an Acura may include:

• Harsh shifting
• Transmission slipping
• Transmission overheating
• Transmission not engaging properly

Acura DTC P1758 causes

Common causes of DTC P1758 in an Acura include:

• Faulty A/T Clutch Pressure Control Solenoid Valve B
• Wiring issues in the solenoid circuit
• Low transmission fluid level
• Dirty or contaminated transmission fluid

Acura DTC P1758 seriousness

DTC P1758 in an Acura should be addressed promptly to prevent further damage to the transmission. Ignoring this code can lead to more severe transmission problems and potential safety hazards.

How to diagnose DTC P1758 on Acura

To diagnose DTC P1758 on an Acura, you can follow these steps:

1. Use a scan tool to retrieve the DTC and freeze frame data
2. Inspect the A/T Clutch Pressure Control Solenoid Valve B and its wiring for any visible damage
3. Check the transmission fluid level and condition
4. Perform a road test to observe the transmission’s behavior

How to fix DTC P1758 on Acura

To fix DTC P1758 on an Acura, you can try the following:

1. Replace the faulty A/T Clutch Pressure Control Solenoid Valve B
2. Repair any damaged wiring in the solenoid circuit
3. Ensure the transmission fluid level is correct and replace if dirty or contaminated
4. Clear the DTC and test drive the vehicle to confirm the issue is resolved

How to erase DTC P1758 on Acura

To erase DTC P1758 on an Acura, you can use a scan tool to clear the code from the vehicle’s computer. After clearing the code, it is recommended to test drive the vehicle to ensure the issue has been resolved.