Audi DTC P1174 – Fuel Trim, Bank 1 Different injection times
DTC P1174 meaning on Audi
The Diagnostic Trouble Code (DTC) P1174 on an Audi indicates that there is a fuel trim imbalance in Bank 1, leading to different injection times for the fuel injectors. This means that the engine control module (ECM) is detecting a discrepancy in the amount of fuel being injected into the cylinders on one side of the engine compared to the other.
Audi DTC P1174 symptoms
Symptoms of DTC P1174 on an Audi may include:
- Check Engine Light (CEL) illuminated on the dashboard
- Decreased fuel efficiency
- Engine running rough or misfiring
- Reduced engine performance
Audi DTC P1174 causes
The common causes of DTC P1174 on an Audi include:
- Vacuum leaks in the intake system
- Faulty oxygen sensor
- Dirty or clogged fuel injectors
- Issues with the fuel pressure regulator
- Malfunctioning mass airflow sensor (MAF)
Audi DTC P1174 seriousness
While DTC P1174 may not cause immediate engine failure, it can lead to poor engine performance, reduced fuel efficiency, and potential long-term damage if left unresolved. It is recommended to address this issue promptly to prevent further complications.
How to diagnose DTC P1174 on Audi
To diagnose DTC P1174 on an Audi, you can perform the following steps:
- Use an OBD-II scanner to retrieve the fault code and further diagnostic information
- Inspect the intake system for any vacuum leaks
- Check the oxygen sensor readings and functionality
- Clean or replace clogged fuel injectors
- Test the fuel pressure regulator for proper operation
- Verify the accuracy of the mass airflow sensor (MAF)
How to fix DTC P1174 on Audi
To fix DTC P1174 on an Audi, you can try the following solutions:
- Repair any vacuum leaks in the intake system
- Replace a faulty oxygen sensor
- Clean or replace clogged fuel injectors
- Address issues with the fuel pressure regulator
- Replace a malfunctioning mass airflow sensor (MAF)
How to erase DTC P1174 on Audi
To erase DTC P1174 on an Audi, you can clear the fault code using an OBD-II scanner or by disconnecting the vehicle’s battery for a few minutes. However, it is important to address the underlying issue causing the fault code before clearing it to prevent it from reoccurring.
Recommended tools for Audi diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.