P1185 – Audi DTC

Audi DTC P1185 – Linear 02 Sensor / Common Ground Wire Short to ground

DTC P1185 meaning on Audi

The Diagnostic Trouble Code (DTC) P1185 for Audi indicates a fault related to the Linear O2 Sensor or Common Ground Wire being shorted to ground. This fault code is specific to the oxygen sensor and its common ground wire in the vehicle’s engine control system.

Audi DTC P1185 symptoms

Symptoms of DTC P1185 on an Audi may include:

• Check Engine Light (MIL) illuminated on the dashboard
• Decreased fuel efficiency
• Engine running rough or misfiring
• Reduced engine performance

Audi DTC P1185 causes

The common causes of DTC P1185 on an Audi can include:

• Short circuit in the wiring of the Linear O2 Sensor
• Faulty Linear O2 Sensor
• Issues with the common ground wire connection
• Corrosion or damage to the sensor or wiring

Audi DTC P1185 seriousness

DTC P1185 should not be ignored as it can lead to poor engine performance, reduced fuel efficiency, and potential damage to the catalytic converter over time. It is recommended to address this issue promptly to prevent further complications.

How to diagnose DTC P1185 on Audi

To diagnose DTC P1185 on an Audi, you can follow these steps:

1. Use an OBD-II scanner to retrieve the fault code and confirm P1185.
2. Inspect the wiring harness and connectors for any visible damage or corrosion.
3. Check the Linear O2 Sensor and its common ground wire for proper connection and functionality.
4. Perform a voltage test to determine if there is a short to ground in the sensor or wiring.

How to fix DTC P1185 on Audi

To fix DTC P1185 on an Audi, you can try the following solutions:

1. Repair or replace any damaged wiring or connectors in the O2 sensor circuit.
2. Replace the Linear O2 Sensor if it is found to be faulty.
3. Clean or repair the common ground wire connection to ensure proper grounding.
4. Clear the fault code using an OBD-II scanner after making the necessary repairs.

How to erase DTC P1185 on Audi

To erase DTC P1185 on an Audi, follow these steps:

1. Ensure the underlying issue causing the fault code has been resolved.
2. Use an OBD-II scanner to access the vehicle’s onboard computer system.
3. Select the option to clear or erase fault codes from the system.
4. Confirm the deletion of the DTC P1185 code and check for any remaining codes.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.