P1213 – Audi DTC

Audi DTC P1213 – Cylinder 1 – Fuel Injector Circuit Short to B+

DTC P1213 meaning on Audi

The Diagnostic Trouble Code (DTC) P1213 for Audi indicates a fault in the fuel injector circuit for cylinder 1. Specifically, it signifies a short circuit to the positive battery voltage (B+). This fault can lead to issues with fuel delivery to the engine cylinder, affecting the combustion process and overall engine performance.

Audi DTC P1213 symptoms

Symptoms associated with DTC P1213 on an Audi may include:

• Engine misfires
• Reduced engine power
• Increased fuel consumption
• Check Engine Light (CEL) illuminated on the dashboard

Audi DTC P1213 causes

The common causes of DTC P1213 on an Audi include:

• Short circuit in the wiring harness related to the fuel injector for cylinder 1
• Faulty fuel injector for cylinder 1
• Issues with the Engine Control Module (ECM)

Audi DTC P1213 seriousness

Ignoring or neglecting DTC P1213 on an Audi can lead to potential engine performance issues and may result in further damage to engine components. It is advisable to address this fault promptly to prevent any long-term damage and ensure optimal engine operation.

How to diagnose DTC P1213 on Audi

To diagnose DTC P1213 on an Audi, follow these steps:

1. Use an OBD-II scanner to retrieve the fault code and confirm P1213.
2. Inspect the wiring harness connected to the fuel injector for cylinder 1 for any visible damage or shorts.
3. Test the fuel injector for cylinder 1 to check for proper operation.
4. Check the ECM for any potential faults or errors related to the fuel injector circuit.

How to fix DTC P1213 on Audi

To fix DTC P1213 on an Audi, consider the following steps:

1. Repair or replace any damaged wiring in the fuel injector circuit for cylinder 1.
2. Replace the faulty fuel injector for cylinder 1 if necessary.
3. If the ECM is found to be faulty, consider reprogramming or replacing it.

How to erase DTC P1213 on Audi

To erase DTC P1213 on an Audi after the issue has been resolved, you can:

1. Use an OBD-II scanner to clear the fault code from the ECM memory.
2. Ensure that the repair or replacement of components related to DTC P1213 has been completed successfully.
3. Perform a test drive to confirm that the fault code does not reappear.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.