P1214 – Audi DTC

Audi DTC P1214 – Cylinder 2 – Fuel Injector Circuit Short to B+

DTC P1214 meaning on Audi

The Diagnostic Trouble Code (DTC) P1214 for Audi indicates a fault in the fuel injector circuit for cylinder 2, specifically a short to battery positive (B+). This means that there is an electrical issue causing the fuel injector in cylinder 2 to receive a constant voltage from the battery, which can lead to improper fuel delivery and affect engine performance.

Audi DTC P1214 symptoms

Symptoms of DTC P1214 on an Audi may include:

• Engine misfires
• Reduced engine performance
• Increased fuel consumption
• Check Engine Light (CEL) illuminated on the dashboard

Audi DTC P1214 causes

The common causes of DTC P1214 on an Audi are:

• Short circuit in the wiring harness connected to the fuel injector for cylinder 2
• Faulty fuel injector for cylinder 2
• Issues with the Engine Control Module (ECM)

Audi DTC P1214 seriousness

Ignoring or neglecting DTC P1214 on an Audi can lead to potential engine damage and decreased fuel efficiency. It is important to address this issue promptly to prevent further complications and ensure optimal engine performance.

How to diagnose DTC P1214 on Audi

To diagnose DTC P1214 on an Audi, follow these steps:

1. Use an OBD-II scanner to retrieve the fault code and confirm P1214.
2. Inspect the wiring harness connected to the fuel injector for cylinder 2 for any visible damage or shorts.
3. Test the fuel injector for cylinder 2 to check for proper operation.
4. Check the ECM for any faults or errors related to the fuel injector circuit.

How to fix DTC P1214 on Audi

To fix DTC P1214 on an Audi, consider the following steps:

1. Repair any damaged wiring or shorts in the circuit connected to the fuel injector for cylinder 2.
2. Replace the faulty fuel injector for cylinder 2 if necessary.
3. If the issue persists, diagnose and address any problems with the Engine Control Module (ECM).

How to erase DTC P1214 on Audi

To erase DTC P1214 on an Audi after fixing the underlying issue, follow these steps:

1. Use an OBD-II scanner to clear the fault code from the ECM memory.
2. Ensure that the repair has been successful by checking for any recurring fault codes.
3. If the repair is effective, the Check Engine Light should turn off, indicating the issue has been resolved.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.