P1219 – Audi DTC

Audi DTC P1219 – Cylinder 7 – Fuel Injector Circuit Short to B+

DTC P1219 meaning on Audi

The Diagnostic Trouble Code (DTC) P1219 for Audi indicates a fault in the fuel injector circuit of cylinder 7, where there is a short to the battery positive terminal (B+). This means that there is an unintended connection between the fuel injector in cylinder 7 and the positive battery terminal, causing an electrical short circuit.

Audi DTC P1219 symptoms

Symptoms of DTC P1219 on an Audi may include:

• Engine misfires
• Reduced engine performance
• Check Engine Light (CEL) illuminated on the dashboard
• Increased fuel consumption

Audi DTC P1219 causes

The potential causes of DTC P1219 on an Audi include:

• Faulty fuel injector in cylinder 7
• Short circuit in the wiring harness connected to the fuel injector
• Corrosion or damage to the fuel injector connector
• Issues with the Engine Control Module (ECM)

Audi DTC P1219 seriousness

DTC P1219 should be addressed promptly as it can lead to engine performance issues and potential damage if left unresolved. Ignoring this fault may result in further complications and increased repair costs over time.

How to diagnose DTC P1219 on Audi

To diagnose DTC P1219 on an Audi, a mechanic may perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and identify the specific cylinder and circuit involved.
2. Inspect the wiring harness connected to the fuel injector in cylinder 7 for any signs of damage, corrosion, or short circuits.
3. Check the fuel injector connector for proper connection and signs of wear.
4. Perform a continuity test to verify the integrity of the circuit between the fuel injector and the ECM.

How to fix DTC P1219 on Audi

To fix DTC P1219 on an Audi, the following steps may be taken:

1. Replace the faulty fuel injector in cylinder 7 if necessary.
2. Repair or replace any damaged wiring harness or connectors related to the fuel injector circuit.
3. Clean or replace the fuel injector connector to ensure a secure connection.
4. If the issue persists, further diagnostics may be required to identify any ECM-related problems.

How to erase DTC P1219 on Audi

After fixing the underlying issue causing DTC P1219 on an Audi, the fault code can be erased using a diagnostic scanner. Follow these steps:

1. Connect the diagnostic scanner to the vehicle’s OBD-II port.
2. Access the scanner’s menu to clear the fault codes stored in the ECM.
3. Follow the on-screen instructions to erase the DTC P1219 code.
4. Once the code is successfully cleared, verify that the Check Engine Light is no longer illuminated.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.