Audi DTC P1241 – Cylinder 5 – Fuel Injector Circuit Open Circ
DTC P1241 meaning on Audi
The Diagnostic Trouble Code (DTC) P1241 for Audi indicates a fault in the Cylinder 5 Fuel Injector Circuit, specifically an open circuit. This means that the Engine Control Module (ECM) has detected a lack of electrical continuity in the fuel injector circuit for cylinder 5, which can lead to improper fuel delivery and affect the engine’s performance.
Audi DTC P1241 symptoms
Symptoms associated with DTC P1241 on an Audi may include:
- Engine misfires
- Reduced engine performance
- Increased fuel consumption
- Check Engine Light (CEL) illuminated on the dashboard
Audi DTC P1241 causes
The common causes of DTC P1241 on an Audi are:
- Faulty fuel injector for cylinder 5
- Wiring or connector issues in the fuel injector circuit
- ECM (Engine Control Module) malfunction
Audi DTC P1241 seriousness
Ignoring or neglecting DTC P1241 on an Audi can lead to potential engine performance issues, increased fuel consumption, and possible damage to the catalytic converter over time. It is recommended to address this fault promptly to prevent further complications.
How to diagnose DTC P1241 on Audi
To diagnose DTC P1241 on an Audi, a mechanic would typically perform the following steps:
- Use a diagnostic scanner to retrieve the fault codes and confirm the presence of P1241.
- Inspect the wiring and connectors related to the fuel injector for cylinder 5 for any visible damage or corrosion.
- Test the fuel injector itself for proper operation and continuity.
- Check the ECM for any potential malfunctions or software issues.
How to fix DTC P1241 on Audi
To fix DTC P1241 on an Audi, the following steps are typically taken:
- Replace the faulty fuel injector for cylinder 5 if it is determined to be the cause of the open circuit.
- Repair or replace any damaged wiring or connectors in the fuel injector circuit.
- If the ECM is found to be faulty, it may need to be reprogrammed or replaced.
How to erase DTC P1241 on Audi
After the necessary repairs have been made to address DTC P1241 on an Audi, the fault code can be erased using a diagnostic scanner. This will clear the code from the ECM’s memory and turn off the Check Engine Light. It is important to ensure that the underlying issue has been resolved before clearing the fault code.
Recommended tools for Audi diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.