P1242 – Audi DTC

Audi DTC P1242 – Cylinder 6 – Fuel Injector Circuit Open Circ

DTC P1242 meaning on Audi

The Diagnostic Trouble Code (DTC) P1242 for Audi indicates a fault in the fuel injector circuit of cylinder 6. This fault specifically points to an open circuit within the fuel injector wiring or connector for the sixth cylinder in the engine.

Audi DTC P1242 symptoms

Symptoms of DTC P1242 on an Audi may include:

• Engine misfires or rough idling
• Decreased engine performance
• Check Engine Light (CEL) illuminated on the dashboard
• In some cases, the vehicle may go into a limp mode to prevent further damage

Audi DTC P1242 causes

The common causes of DTC P1242 on an Audi are:

• Open circuit in the wiring harness connected to the fuel injector of cylinder 6
• Corrosion or damage to the fuel injector connector
• Faulty fuel injector for cylinder 6
• Issues with the Engine Control Module (ECM) or related components

Audi DTC P1242 seriousness

DTC P1242 should be addressed promptly as it can lead to poor engine performance, increased fuel consumption, and potential damage to the engine if left unresolved. Ignoring this fault may result in further complications and costly repairs.

How to diagnose DTC P1242 on Audi

To diagnose DTC P1242 on an Audi, follow these steps:

1. Use an OBD-II scanner to retrieve the fault code and confirm it is P1242.
2. Inspect the wiring harness and connector for the fuel injector of cylinder 6 for any visible damage or corrosion.
3. Test the fuel injector for cylinder 6 to ensure it is functioning correctly.
4. Check the ECM and related components for any faults or malfunctions.

How to fix DTC P1242 on Audi

To fix DTC P1242 on an Audi, consider the following steps:

1. Repair or replace any damaged wiring harness or connector associated with the fuel injector of cylinder 6.
2. If the fuel injector is faulty, replace it with a new one.
3. Ensure all connections are secure and free of corrosion.
4. If the issue persists, consult a professional mechanic for further diagnosis and repair.

How to erase DTC P1242 on Audi

To erase DTC P1242 on an Audi, you can:

1. Use an OBD-II scanner to clear the fault code after the necessary repairs have been made.
2. Ensure the issue causing the fault code has been resolved before clearing it.
3. After clearing the code, monitor the vehicle for any recurring issues or warning lights.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.