P1244 – Audi DTC

Audi DTC P1244 – Cylinder 8 – Fuel Injector Circuit Open Circ

DTC P1244 meaning on Audi

DTC P1244 on an Audi indicates a fault with the fuel injector circuit for cylinder 8. The Engine Control Module (ECM) has detected an open circuit in the fuel injector wiring for cylinder 8, causing a disruption in the fuel delivery process.

Audi DTC P1244 symptoms

Symptoms of DTC P1244 on an Audi may include:

• Engine misfires
• Loss of power
• Rough idling
• Decreased fuel efficiency
• Check Engine Light (CEL) illuminated

Audi DTC P1244 causes

Common causes of DTC P1244 on an Audi include:

• Faulty fuel injector for cylinder 8
• Open or short circuit in the fuel injector wiring
• Faulty Engine Control Module (ECM)
• Corrosion or poor connections in the wiring harness

Audi DTC P1244 seriousness

DTC P1244 should be addressed promptly to prevent potential engine damage and ensure optimal performance. Ignoring this fault can lead to further issues such as increased emissions, reduced fuel efficiency, and potential engine misfires.

How to diagnose DTC P1244 on Audi

To diagnose DTC P1244 on an Audi, follow these steps:

1. Use a diagnostic scanner to retrieve the fault code and freeze frame data
2. Inspect the wiring harness for any visible damage or corrosion
3. Check the fuel injector for cylinder 8 for proper operation
4. Test the continuity of the fuel injector circuit using a multimeter
5. Inspect the ECM for any signs of damage or malfunction

How to fix DTC P1244 on Audi

To fix DTC P1244 on an Audi, consider the following steps:

1. Repair or replace any damaged wiring in the fuel injector circuit
2. Replace the faulty fuel injector for cylinder 8
3. If necessary, replace the Engine Control Module (ECM)
4. Clear the fault code using a diagnostic scanner after completing the repairs
5. Perform a test drive to ensure the issue has been resolved

How to erase DTC P1244 on Audi

To erase DTC P1244 on an Audi, follow these steps:

1. Connect a diagnostic scanner to the vehicle’s OBD-II port
2. Select the “Erase Codes” or “Clear Codes” function on the scanner
3. Follow the on-screen prompts to confirm the deletion of the fault code
4. Once the code is cleared, disconnect the scanner and start the vehicle to ensure the code has been successfully erased

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.