P1248 – Audi DTC

Audi DTC P1248 – Injection Start Control Deviation

DTC P1248 meaning on Audi

The Diagnostic Trouble Code (DTC) P1248 for Audi refers to “Injection Start Control Deviation.” This code indicates that there is a deviation in the control of the injection start timing in the engine’s fuel system.

Audi DTC P1248 symptoms

Symptoms of DTC P1248 on an Audi may include:

• Engine misfires
• Reduced engine performance
• Increased fuel consumption
• Check Engine Light (CEL) illuminated on the dashboard

Audi DTC P1248 causes

Common causes of DTC P1248 on an Audi include:

• Faulty fuel injectors
• Issues with the fuel injection timing control system
• Problems with the engine’s fuel system sensors
• Wiring or connection issues related to the fuel system

Audi DTC P1248 seriousness

The seriousness of DTC P1248 on an Audi should not be ignored, as it can lead to poor engine performance, reduced fuel efficiency, and potential long-term damage to the engine if left unresolved. It is recommended to address this issue promptly to prevent further complications.

How to diagnose DTC P1248 on Audi

To diagnose DTC P1248 on an Audi, a mechanic may perform the following steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s Engine Control Module (ECM)
2. Inspect the fuel injectors for proper operation and cleanliness
3. Check the fuel injection timing control system for any faults or malfunctions
4. Test the engine’s fuel system sensors for accuracy
5. Inspect the wiring and connections related to the fuel system for any damage or loose connections

How to fix DTC P1248 on Audi

To fix DTC P1248 on an Audi, the following steps may be taken:

1. Replace any faulty fuel injectors
2. Repair or replace components of the fuel injection timing control system as needed
3. Address any issues with the engine’s fuel system sensors
4. Repair or replace damaged wiring or connections related to the fuel system
5. Clear the fault codes stored in the ECM after completing the repairs

How to erase DTC P1248 on Audi

To erase DTC P1248 on an Audi, the fault codes can be cleared using a diagnostic scanner or by disconnecting the vehicle’s battery for a few minutes. However, it is important to address and fix the underlying issue causing the fault code before clearing it to prevent it from reoccurring.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.