P1254 – Audi DTC

Audi DTC P1254 – Fuel consumption signal Short to B+

DTC P1254 meaning on Audi

The Diagnostic Trouble Code (DTC) P1254 for Audi indicates a “Fuel consumption signal Short to B+” error. This means that there is a short circuit between the fuel consumption signal wire and the positive battery terminal.

Audi DTC P1254 symptoms

Symptoms of DTC P1254 on an Audi may include:

• Check Engine Light (MIL) illuminated
• Decreased fuel efficiency
• Engine running rough or misfiring
• Reduced engine performance

Audi DTC P1254 causes

Common causes of DTC P1254 on an Audi include:

• Short circuit in the fuel consumption signal wire
• Faulty fuel consumption sensor
• Corroded or damaged wiring harness
• Issues with the Engine Control Module (ECM)

Audi DTC P1254 seriousness

While DTC P1254 may not cause immediate drivability issues, it can lead to decreased fuel efficiency and potential engine performance problems if left unresolved. It is recommended to address this issue promptly to prevent further complications.

How to diagnose DTC P1254 on Audi

To diagnose DTC P1254 on an Audi, follow these steps:

1. Use an OBD-II scanner to retrieve the fault codes.
2. Inspect the fuel consumption signal wire for any signs of damage or short circuits.
3. Check the fuel consumption sensor for proper operation.
4. Inspect the wiring harness for corrosion or damage.
5. Perform a thorough visual inspection of the components involved.

How to fix DTC P1254 on Audi

To fix DTC P1254 on an Audi, consider the following steps:

1. Repair any damaged or shorted wires in the fuel consumption signal circuit.
2. Replace the faulty fuel consumption sensor if necessary.
3. Repair or replace any corroded or damaged wiring harnesses.
4. Clear the fault codes using an OBD-II scanner after completing the repairs.
5. Perform a test drive to ensure the issue has been resolved.

How to erase DTC P1254 on Audi

To erase DTC P1254 on an Audi, follow these steps:

1. Use an OBD-II scanner to clear the fault codes.
2. Ensure that the underlying issue causing the fault code has been resolved.
3. Perform a test drive to confirm that the Check Engine Light does not reappear.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.