P1348 – Audi DTC

Audi DTC P1348 – Ignition Coil Power Output Stage 1 Open Circuit

DTC P1348 meaning on Audi

The Diagnostic Trouble Code (DTC) P1348 for Audi indicates an open circuit in the ignition coil power output stage 1. This means that there is a disruption in the electrical circuit that supplies power to the ignition coil, leading to potential issues with the ignition system’s performance.

Audi DTC P1348 symptoms

Symptoms of DTC P1348 on an Audi may include:

• Engine misfires
• Rough idling
• Loss of power
• Difficulty starting the engine
• Illuminated Check Engine Light

Audi DTC P1348 causes

Common causes of DTC P1348 on an Audi include:

• Faulty ignition coil
• Wiring issues or loose connections
• Corrosion in the electrical connections
• Defective Engine Control Module (ECM)

Audi DTC P1348 seriousness

Ignoring DTC P1348 on an Audi can lead to potential engine performance issues and further damage to the ignition system. It is important to address this code promptly to prevent more severe problems and ensure the vehicle operates efficiently.

How to diagnose DTC P1348 on Audi

To diagnose DTC P1348 on an Audi, you can perform the following steps:

1. Use an OBD-II scanner to retrieve the fault code and check for any additional codes.
2. Inspect the ignition coil and its wiring for any visible damage or loose connections.
3. Test the continuity of the wiring harness connected to the ignition coil.
4. Check the ECM for any signs of malfunction.

How to fix DTC P1348 on Audi

To fix DTC P1348 on an Audi, you can follow these steps:

1. Replace the faulty ignition coil if it is determined to be the cause of the open circuit.
2. Repair any damaged wiring or connections in the ignition coil circuit.
3. Clean any corrosion from the electrical connections.
4. If the ECM is faulty, consider replacing or reprogramming it.

How to erase DTC P1348 on Audi

To erase DTC P1348 on an Audi, you can:

1. Use an OBD-II scanner to clear the fault code after the underlying issue has been resolved.
2. Ensure that the repairs have been completed successfully before clearing the code.
3. Perform a test drive to confirm that the Check Engine Light does not reappear.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.