Audi DTC P1357 – Cylinder 1, ignition circuit Short to ground
DTC P1357 meaning on Audi
DTC P1357 for Audi indicates a fault in the ignition circuit of cylinder 1, specifically a short to ground. This fault can disrupt the proper functioning of the ignition system, leading to potential performance issues.
Audi DTC P1357 symptoms
Symptoms of DTC P1357 on an Audi may include rough idling, misfiring, loss of power, and in some cases, the vehicle may not start at all. The Check Engine Light will also be illuminated on the dashboard.
Audi DTC P1357 causes
The most common causes of DTC P1357 on an Audi are a faulty ignition coil, damaged wiring in the ignition circuit, or a poor connection in the circuit. Environmental factors such as moisture or corrosion can also contribute to this issue.
Audi DTC P1357 seriousness
While DTC P1357 may not cause immediate harm to the vehicle, it can lead to poor engine performance and decreased fuel efficiency. Ignoring this fault can potentially cause further damage to the engine over time.
How to diagnose DTC P1357 on Audi
To diagnose DTC P1357 on an Audi, a mechanic would typically use a diagnostic scanner to retrieve the fault code and then perform a visual inspection of the ignition system components. They would check the ignition coil, wiring, and connections for any signs of damage or corrosion.
Additionally, testing the resistance of the ignition coil and checking for continuity in the wiring can help pinpoint the exact cause of the short to ground fault.
How to fix DTC P1357 on Audi
To fix DTC P1357 on an Audi, the faulty ignition coil or damaged wiring must be replaced. The mechanic would start by disconnecting the battery, then removing and replacing the defective component. It is crucial to ensure that all connections are secure and free of any debris.
After the repair is completed, the mechanic would clear the fault code and reset the Check Engine Light using a diagnostic scanner.
How to erase DTC P1357 on Audi
To erase DTC P1357 on an Audi, a diagnostic scanner is required. The mechanic would connect the scanner to the vehicle’s OBD-II port, navigate to the DTC menu, and select the option to clear the fault code. Once the code is successfully cleared, the Check Engine Light should turn off.
Recommended tools for Audi diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.