Audi DTC P1360 – Cylinder 2, ignition circuit Short Circuit to Ground
DTC P1360 meaning on Audi
DTC P1360 for Audi indicates a fault in the ignition circuit of cylinder 2, specifically a short circuit to ground. This fault can disrupt the proper functioning of the ignition system, leading to potential performance issues and engine misfires.
Audi DTC P1360 symptoms
Symptoms of DTC P1360 on an Audi may include rough idling, engine misfires, loss of power, and in some cases, the Check Engine Light may illuminate on the dashboard. The vehicle may also experience difficulties starting or have poor acceleration.
Audi DTC P1360 causes
The most common causes of DTC P1360 on an Audi include a faulty ignition coil, damaged wiring in the ignition circuit, or a defective Engine Control Module (ECM). Additionally, poor electrical connections or corrosion can also lead to this fault code.
Audi DTC P1360 seriousness
Ignoring DTC P1360 on an Audi can lead to further damage to the engine and catalytic converter. Continued driving with this fault may result in decreased fuel efficiency, increased emissions, and potential engine overheating. It is recommended to address this issue promptly to prevent more severe problems.
How to diagnose DTC P1360 on Audi
To diagnose DTC P1360 on an Audi, a mechanic would typically start by using a diagnostic scanner to retrieve the fault code and perform a visual inspection of the ignition system components. They would then test the ignition coil, check the wiring for any signs of damage, and inspect the ECM for faults. Additionally, conducting a continuity test on the circuit can help pinpoint the exact location of the short circuit to ground.
How to fix DTC P1360 on Audi
Fixing DTC P1360 on an Audi involves identifying and repairing the root cause of the short circuit to ground in the ignition circuit of cylinder 2. This may require replacing a faulty ignition coil, repairing damaged wiring, or addressing any issues with the ECM. Once the fault has been rectified, the system should be tested to ensure proper functionality before clearing the fault code.
How to erase DTC P1360 on Audi
To erase DTC P1360 on an Audi, a diagnostic scanner can be used to clear the fault code from the ECM’s memory. After the repair has been completed and the issue resolved, the scanner can be used to reset the Check Engine Light and erase the fault code. It is important to verify that the repair was successful by driving the vehicle and ensuring that the fault code does not reappear.
Recommended tools for Audi diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.