Audi DTC P1372 – Cylinder 6, ignition circuit short to ground
DTC P1372 meaning on Audi
DTC P1372 on an Audi indicates a fault in the ignition circuit for cylinder 6, specifically a short to ground. This means that there is an unintended connection between the ignition system of cylinder 6 and the vehicle’s ground, causing a disruption in the proper functioning of the ignition system.
Audi DTC P1372 symptoms
Symptoms of DTC P1372 on an Audi may include rough idling, misfiring, loss of power, engine stalling, and in some cases, the Check Engine Light may illuminate on the dashboard. These symptoms can vary depending on the severity of the short to ground in the ignition circuit.
Audi DTC P1372 causes
The most common causes of DTC P1372 on an Audi include a damaged ignition coil, faulty spark plug, wiring issues in the ignition circuit, or a problem with the Engine Control Module (ECM). Additionally, poor electrical connections or corrosion can also lead to a short to ground in the ignition circuit.
Audi DTC P1372 seriousness
Ignoring DTC P1372 on an Audi can lead to further damage to the engine and other components. Continued driving with a short to ground in the ignition circuit can cause permanent damage to the ignition system, resulting in costly repairs. It is important to address this issue promptly to prevent any long-term consequences.
How to diagnose DTC P1372 on Audi
To diagnose DTC P1372 on an Audi, a mechanic would typically start by using a diagnostic scanner to retrieve the fault codes stored in the vehicle’s ECM. They would then inspect the ignition coil, spark plug, and wiring associated with cylinder 6 to identify any visible damage or signs of a short to ground. Additionally, conducting a thorough visual inspection of the ignition system can help pinpoint the source of the issue.
How to fix DTC P1372 on Audi
Fixing DTC P1372 on an Audi involves addressing the root cause of the short to ground in the ignition circuit. This may require replacing the faulty ignition coil, spark plug, or repairing any damaged wiring. Ensuring that all electrical connections are secure and free of corrosion is essential to prevent future issues. Once the necessary repairs have been made, clearing the fault codes and resetting the ECM can help verify that the issue has been resolved.
How to erase DTC P1372 on Audi
To erase DTC P1372 on an Audi, a mechanic can use a diagnostic scanner to clear the fault codes stored in the ECM. After completing the necessary repairs to address the short to ground in the ignition circuit, the mechanic can reset the ECM to remove the fault code. It is important to verify that the issue has been resolved and that the Check Engine Light is no longer illuminated before considering the fault code erased.
Recommended tools for Audi diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.