Audi DTC P1375 – Cylinder 7, ignition circuit short to ground
DTC P1375 meaning on Audi
DTC P1375 on an Audi indicates a fault in the ignition circuit for cylinder 7, specifically a short to ground. This fault code is triggered when the Engine Control Module (ECM) detects that the ignition circuit for cylinder 7 is shorted to ground, causing a disruption in the proper ignition timing and combustion process.
Audi DTC P1375 symptoms
Symptoms of DTC P1375 on an Audi may include:
- Engine misfires
- Rough idling
- Loss of power
- Check Engine Light (CEL) illuminated
Audi DTC P1375 causes
The common causes of DTC P1375 on an Audi include:
- Short to ground in the ignition circuit for cylinder 7
- Faulty ignition coil for cylinder 7
- Wiring issues in the ignition circuit
- ECM malfunction
Audi DTC P1375 seriousness
Ignoring DTC P1375 on an Audi can lead to potential engine damage and decreased performance. It is important to address this issue promptly to prevent further complications.
How to diagnose DTC P1375 on Audi
To diagnose DTC P1375 on an Audi, follow these steps:
- Use a diagnostic scanner to retrieve the fault code and confirm DTC P1375.
- Inspect the ignition coil for cylinder 7 and check for any visible damage or signs of shorting.
- Check the wiring harness connected to the ignition coil for any fraying or damage.
- Perform a continuity test on the ignition circuit for cylinder 7 to identify any short to ground.
- If necessary, test the ECM for proper functionality.
How to fix DTC P1375 on Audi
To fix DTC P1375 on an Audi, consider the following steps:
- Replace the faulty ignition coil for cylinder 7.
- Repair or replace any damaged wiring in the ignition circuit.
- If a short to ground is detected, isolate and repair the shorted section of the circuit.
- If the ECM is found to be faulty, consider reprogramming or replacing it.
How to erase DTC P1375 on Audi
To erase DTC P1375 on an Audi, you can use a diagnostic scanner to clear the fault code from the ECM’s memory. After addressing the underlying issue causing the fault code, clearing it from the system will reset the Check Engine Light and ensure proper operation.
Recommended tools for Audi diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.