P1391 – Audi DTC

Audi DTC P1391 – Camshaft Position Sensor, Bank2 Short to Ground

DTC P1391 meaning on Audi

The DTC P1391 code on an Audi indicates a fault with the Camshaft Position Sensor, Bank 2 being shorted to ground. This sensor is responsible for monitoring the position of the camshaft in relation to the crankshaft, providing crucial data for the engine control unit to adjust ignition timing and fuel injection.

Audi DTC P1391 symptoms

Common symptoms of the DTC P1391 code on an Audi may include:

  • Check Engine Light illuminated
  • Engine running rough or misfiring
  • Loss of power or acceleration
  • Engine stalling

Audi DTC P1391 causes

The DTC P1391 code on an Audi can be triggered by various factors, including:

  • Faulty camshaft position sensor
  • Short circuit to ground in the wiring harness
  • Corrosion or poor connections in the sensor circuit

Audi DTC P1391 seriousness

Ignoring the DTC P1391 code on an Audi can lead to potential engine performance issues, increased fuel consumption, and possible engine damage over time. It is recommended to address this issue promptly to prevent further complications.

How to diagnose DTC P1391 on Audi

Diagnosing the DTC P1391 code on an Audi involves the following steps:

  1. Use a diagnostic scanner to retrieve the fault codes
  2. Inspect the camshaft position sensor and its wiring for any visible damage
  3. Check for continuity and resistance in the sensor circuit
  4. Perform a visual inspection of the sensor connector and terminals

How to fix DTC P1391 on Audi

To fix the DTC P1391 code on an Audi, you can follow these steps:

  1. Replace the faulty camshaft position sensor
  2. Repair any short circuits or damaged wiring in the sensor circuit
  3. Clean or replace corroded connectors and terminals
  4. Clear the fault codes and perform a test drive to verify the repair

How to erase DTC P1391 on Audi

To erase the DTC P1391 code on an Audi, you can use a diagnostic scanner to clear the fault codes stored in the engine control unit. Once the codes are cleared, you can reset the Check Engine Light and monitor the vehicle for any recurring issues.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.