P1408 – Audi DTC

Audi DTC P1408 – EGR Temperature Sensor Signal too High

DTC P1408 meaning on Audi

The Diagnostic Trouble Code (DTC) P1408 for Audi indicates that the Engine Control Module (ECM) has detected a high signal from the Exhaust Gas Recirculation (EGR) temperature sensor. This sensor is responsible for monitoring the temperature of the exhaust gases entering the EGR system.

Audi DTC P1408 symptoms

Symptoms of DTC P1408 on an Audi may include:

• Check Engine Light illuminated on the dashboard
• Reduced engine performance
• Increased fuel consumption
• Potential rough idling or stalling

Audi DTC P1408 causes

Common causes of DTC P1408 on an Audi include:

• Failed EGR temperature sensor
• Wiring or connector issues in the EGR temperature sensor circuit
• Carbon buildup in the EGR system affecting sensor readings

Audi DTC P1408 seriousness

While DTC P1408 may not cause immediate drivability issues, it can lead to reduced engine efficiency and increased emissions if left unresolved. It is recommended to address this issue promptly to prevent further complications.

How to diagnose DTC P1408 on Audi

To diagnose DTC P1408 on an Audi, follow these steps:

1. Use an OBD-II scanner to retrieve the fault code and freeze frame data
2. Inspect the EGR temperature sensor and its wiring for any visible damage or corrosion
3. Perform a resistance test on the EGR temperature sensor to check for proper functionality
4. Check for any carbon buildup in the EGR system that may be affecting sensor readings

How to fix DTC P1408 on Audi

To fix DTC P1408 on an Audi, consider the following steps:

1. Replace the EGR temperature sensor if it is found to be faulty
2. Repair any damaged wiring or connectors in the EGR temperature sensor circuit
3. Clean out any carbon deposits in the EGR system to ensure proper sensor operation
4. Clear the fault code and test drive the vehicle to ensure the issue has been resolved

How to erase DTC P1408 on Audi

To erase DTC P1408 on an Audi, you can use an OBD-II scanner to clear the fault code from the ECM’s memory. After addressing the underlying issue causing the fault code, clearing it from the system will reset the Check Engine Light and allow you to monitor the vehicle for any recurring problems.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.