P1453 – Audi DTC

Audi DTC P1453 – Exhaust gas temperature sensor 1 open/short to B+

DTC P1453 meaning on Audi

The Diagnostic Trouble Code (DTC) P1453 for Audi indicates an issue with the Exhaust Gas Temperature (EGT) sensor 1 circuit. Specifically, it signifies an open or short circuit to B+ (battery positive) in the EGT sensor 1 circuit.

Audi DTC P1453 symptoms

Symptoms of DTC P1453 on an Audi may include:

• Check Engine Light (MIL) illuminated on the dashboard
• Reduced engine performance or power
• Potential increase in fuel consumption

Audi DTC P1453 causes

Common causes of DTC P1453 on an Audi include:

• Wiring issues such as open circuits or short circuits
• Faulty Exhaust Gas Temperature (EGT) sensor 1
• Corrosion or poor connections in the sensor circuit

Audi DTC P1453 seriousness

While DTC P1453 may not cause immediate drivability issues, it is important to address this fault promptly to prevent potential damage to the engine or emissions system. Ignoring the issue could lead to increased fuel consumption and reduced engine efficiency.

How to diagnose DTC P1453 on Audi

To diagnose DTC P1453 on an Audi, follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s Engine Control Module (ECM)
2. Inspect the wiring harness and connectors for any visible damage or corrosion
3. Test the Exhaust Gas Temperature (EGT) sensor 1 for proper operation using a multimeter
4. Check for continuity and resistance in the sensor circuit

How to fix DTC P1453 on Audi

To fix DTC P1453 on an Audi, consider the following steps:

1. Repair any damaged wiring or connectors in the EGT sensor 1 circuit
2. Replace the faulty Exhaust Gas Temperature (EGT) sensor 1 if necessary
3. Clean or replace any corroded connections in the sensor circuit
4. Clear the fault codes using a diagnostic scanner after completing the repairs

How to erase DTC P1453 on Audi

To erase DTC P1453 on an Audi, follow these steps:

1. Connect a diagnostic scanner to the vehicle’s OBD-II port
2. Access the ECM or Engine Control Module menu on the scanner
3. Select the option to clear or erase fault codes
4. Confirm the action and wait for the scanner to clear the DTC P1453 code

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.