P1455 – Audi DTC

Audi DTC P1455 – Exhaust gas temperature sensor 1 range/performance

DTC P1455 meaning on Audi

The DTC P1455 code on an Audi indicates an issue with the exhaust gas temperature sensor 1, specifically related to its range/performance. This sensor is responsible for monitoring the temperature of the exhaust gases leaving the engine.

Audi DTC P1455 symptoms

Common symptoms of DTC P1455 on an Audi may include:

• Check Engine Light illuminated on the dashboard
• Reduced engine performance
• Increased fuel consumption
• Engine running rough or misfiring

Audi DTC P1455 causes

The DTC P1455 code on an Audi can be triggered by various factors, including:

• Faulty exhaust gas temperature sensor 1
• Wiring issues or poor connections in the sensor circuit
• Exhaust system leaks
• Software or calibration issues

Audi DTC P1455 seriousness

While the DTC P1455 code may not cause immediate drivability issues, it is important to address it promptly to prevent potential damage to the engine or emissions system. Ignoring this code can lead to decreased fuel efficiency and increased emissions.

How to diagnose DTC P1455 on Audi

Diagnosing the DTC P1455 code on an Audi typically involves the following steps:

1. Use an OBD-II scanner to retrieve the fault code and freeze frame data
2. Inspect the exhaust gas temperature sensor 1 and its wiring for any visible damage
3. Check for exhaust leaks or other issues in the exhaust system
4. Perform a sensor resistance test to determine if it is functioning correctly

How to fix DTC P1455 on Audi

Fixing the DTC P1455 code on an Audi may require the following actions:

1. Replace the faulty exhaust gas temperature sensor 1
2. Repair any damaged wiring or connections in the sensor circuit
3. Address any exhaust system leaks or issues
4. Perform a software update or calibration if necessary

How to erase DTC P1455 on Audi

After addressing the underlying issue causing the DTC P1455 code on an Audi, you can erase the code using an OBD-II scanner. Follow these steps:

1. Connect the OBD-II scanner to the vehicle’s diagnostic port
2. Navigate to the “Erase Codes” or “Clear Codes” function on the scanner
3. Confirm the action to clear the DTC P1455 code from the vehicle’s memory

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.