Audi DTC P1468 – EVAP Canister Purge Solenoid Valve Short Circuit to Ground
DTC P1468 meaning on Audi
DTC P1468 on an Audi indicates a short circuit to ground in the EVAP (Evaporative Emission Control System) Canister Purge Solenoid Valve circuit. This fault code is specific to the EVAP system, which is responsible for capturing and storing fuel vapors to prevent them from escaping into the atmosphere.
Audi DTC P1468 symptoms
Symptoms of DTC P1468 on an Audi may include:
- Check Engine Light (MIL) illuminated
- Decreased fuel efficiency
- Strong fuel odor near the vehicle
- Rough idling or stalling
Audi DTC P1468 causes
The common causes of DTC P1468 on an Audi are:
- Short circuit to ground in the EVAP Canister Purge Solenoid Valve wiring
- Faulty EVAP Canister Purge Solenoid Valve
- Corrosion or poor connections in the wiring harness
Audi DTC P1468 seriousness
While DTC P1468 may not cause immediate drivability issues, it is important to address this fault code promptly. Ignoring the EVAP system malfunction can lead to increased emissions, potential fuel leaks, and may cause the vehicle to fail emissions tests.
How to diagnose DTC P1468 on Audi
To diagnose DTC P1468 on an Audi, a mechanic would typically perform the following steps:
- Use a diagnostic scanner to retrieve the fault code and freeze frame data
- Inspect the EVAP Canister Purge Solenoid Valve wiring for any visible damage or corrosion
- Test the EVAP Canister Purge Solenoid Valve for proper operation
- Check the connections and continuity in the wiring harness
How to fix DTC P1468 on Audi
To fix DTC P1468 on an Audi, the following steps may be taken:
- Repair or replace any damaged wiring in the EVAP Canister Purge Solenoid Valve circuit
- Replace the faulty EVAP Canister Purge Solenoid Valve if necessary
- Clean or replace any corroded connectors in the wiring harness
- Clear the fault code and perform a test drive to ensure the issue is resolved
How to erase DTC P1468 on Audi
To erase DTC P1468 on an Audi, the fault code can be cleared using a diagnostic scanner. After the repair has been completed, the mechanic can reset the Check Engine Light and erase the fault code from the vehicle’s memory. It is important to ensure that the underlying issue causing the fault code has been addressed before clearing it.
Recommended tools for Audi diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.