P1475 – Audi DTC

Audi DTC P1475 – EVAP Emission Control LDP Circ Malfunction/Signal CircuitOpen

DTC P1475 meaning on Audi

DTC P1475 on an Audi indicates an EVAP Emission Control LDP (Leak Detection Pump) Circuit Malfunction or Signal Circuit Open. This fault code is related to the vehicle’s evaporative emission control system, which is responsible for capturing and storing fuel vapors to prevent them from escaping into the atmosphere.

Audi DTC P1475 symptoms

Symptoms of DTC P1475 on an Audi may include:

• Check Engine Light illuminated on the dashboard
• Decreased fuel efficiency
• Strong fuel odor near the vehicle
• Issues with passing emissions tests

Audi DTC P1475 causes

Common causes of DTC P1475 on an Audi include:

• Faulty Leak Detection Pump (LDP)
• Open or short circuit in the LDP wiring
• Corroded or damaged connectors in the EVAP system
• EVAP system leaks or blockages

Audi DTC P1475 seriousness

While DTC P1475 may not cause immediate drivability issues, it is important to address this fault code promptly. Ignoring the problem can lead to increased emissions, potential environmental harm, and may cause the vehicle to fail emissions tests.

How to diagnose DTC P1475 on Audi

To diagnose DTC P1475 on an Audi, a mechanic may perform the following steps:

1. Use an OBD-II scanner to retrieve the fault code and freeze frame data
2. Inspect the EVAP system components for visible damage or leaks
3. Check the LDP and its wiring for continuity and proper operation
4. Perform a smoke test to detect any leaks in the EVAP system

How to fix DTC P1475 on Audi

To fix DTC P1475 on an Audi, the following steps may be taken:

1. Replace the faulty Leak Detection Pump (LDP)
2. Repair or replace any damaged wiring or connectors in the EVAP system
3. Clear any blockages or leaks in the EVAP system components
4. Reset the Check Engine Light after completing repairs

How to erase DTC P1475 on Audi

To erase DTC P1475 on an Audi, follow these steps:

1. Use an OBD-II scanner to clear the fault code
2. Ensure that the underlying issue causing the fault code has been resolved
3. Perform a test drive to verify that the Check Engine Light does not reappear

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.