P1544 – Audi DTC

Audi DTC P1544 – Throttle Actuation Potentiometer Signal too High

DTC P1544 meaning on Audi

The Diagnostic Trouble Code (DTC) P1544 for Audi indicates that the throttle actuation potentiometer signal is too high. This means that the signal being sent by the throttle actuation potentiometer to the engine control module is registering a voltage that exceeds the predetermined threshold.

Audi DTC P1544 symptoms

Symptoms of DTC P1544 on an Audi may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Reduced engine power or acceleration
• Unresponsive throttle pedal
• Inconsistent engine idling

Audi DTC P1544 causes

The common causes of DTC P1544 on an Audi can include:

• Malfunctioning throttle actuation potentiometer
• Wiring or connector issues in the throttle actuation circuit
• Faulty engine control module (ECM)

Audi DTC P1544 seriousness

While DTC P1544 may not always result in immediate drivability issues, it is important to address this fault as it can lead to reduced engine performance and potential safety concerns. Ignoring this DTC could result in further damage to engine components over time.

How to diagnose DTC P1544 on Audi

To diagnose DTC P1544 on an Audi, you can follow these steps:

1. Use an OBD-II scanner to retrieve the fault code and freeze frame data
2. Inspect the throttle actuation potentiometer and its wiring for any visible damage or corrosion
3. Check the throttle actuation potentiometer signal using a multimeter to verify if it is within specifications
4. Perform a thorough visual inspection of the throttle system components

How to fix DTC P1544 on Audi

To fix DTC P1544 on an Audi, you can try the following solutions:

1. Replace the throttle actuation potentiometer if it is found to be faulty
2. Repair any damaged wiring or connectors in the throttle actuation circuit
3. If necessary, replace the engine control module (ECM)
4. Clear the fault code and perform a test drive to ensure the issue has been resolved

How to erase DTC P1544 on Audi

To erase DTC P1544 on an Audi, you can use an OBD-II scanner to clear the fault code from the engine control module’s memory. After addressing the underlying issue causing the fault code, clearing the code will reset the Check Engine Light and allow you to monitor the vehicle for any recurring issues.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.