P1553 – Audi DTC

Audi DTC P1553 – Barometric/manifold pressure signal ratio out of range

DTC P1553 meaning on Audi

The Diagnostic Trouble Code (DTC) P1553 for Audi indicates that the barometric/manifold pressure signal ratio is out of range. This means that there is an issue with the relationship between the barometric pressure and the manifold pressure being detected by the vehicle’s sensors.

Audi DTC P1553 symptoms

Symptoms of DTC P1553 on an Audi may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Reduced engine performance
• Engine stalling or rough idling
• Decreased fuel efficiency

Audi DTC P1553 causes

Common causes of DTC P1553 on an Audi include:

• Faulty barometric pressure sensor
• Issues with the manifold pressure sensor
• Vacuum leaks in the intake system
• Wiring or connector problems in the sensor circuit

Audi DTC P1553 seriousness

While DTC P1553 may not always result in immediate drivability issues, it is important to address this problem promptly. Ignoring this fault can lead to decreased engine performance, reduced fuel efficiency, and potential long-term damage to engine components.

How to diagnose DTC P1553 on Audi

To diagnose DTC P1553 on an Audi, you can perform the following steps:

1. Use an OBD-II scanner to retrieve the specific fault code
2. Inspect the barometric pressure sensor and manifold pressure sensor for any visible damage
3. Check for vacuum leaks in the intake system
4. Test the sensor circuit for proper voltage and continuity

How to fix DTC P1553 on Audi

To fix DTC P1553 on an Audi, you can try the following solutions:

1. Replace the faulty barometric pressure sensor or manifold pressure sensor
2. Repair any vacuum leaks in the intake system
3. Check and repair any wiring or connector issues in the sensor circuit
4. Clear the fault code and reset the Check Engine Light

How to erase DTC P1553 on Audi

To erase DTC P1553 on an Audi, you can use an OBD-II scanner to clear the fault code from the vehicle’s computer. Once the issue has been addressed and fixed, clearing the code will reset the Check Engine Light and ensure that the fault does not reoccur.