P1627 – Audi DTC

Audi DTC P1627 – Data-Bus Powertrain missing message from fuel injection pump

DTC P1627 meaning on Audi

DTC P1627 on an Audi indicates a missing message from the fuel injection pump data bus to the powertrain control module (PCM). This communication error can lead to various issues with the engine’s performance and overall drivability.

Audi DTC P1627 symptoms

Symptoms of DTC P1627 on an Audi may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Engine running rough or misfiring
• Reduced engine power
• Poor fuel efficiency
• Difficulty starting the engine

Audi DTC P1627 causes

Common causes of DTC P1627 on an Audi include:

• Faulty fuel injection pump
• Wiring or connection issues in the data bus circuit
• Defective powertrain control module (PCM)
• Interference from other electronic components

Audi DTC P1627 seriousness

DTC P1627 should not be ignored as it can lead to potential drivability issues and engine performance problems. Continuing to drive with this fault present may cause further damage to the vehicle and result in costly repairs.

How to diagnose DTC P1627 on Audi

To diagnose DTC P1627 on an Audi, a mechanic will typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and related data
2. Inspect the fuel injection pump and related components for any visible damage or signs of malfunction
3. Check the wiring and connections in the data bus circuit for any loose connections or corrosion
4. Perform a thorough inspection of the PCM and other relevant electronic components

How to fix DTC P1627 on Audi

To fix DTC P1627 on an Audi, the following steps may be taken:

1. Repair or replace any faulty components in the fuel injection pump system
2. Address any wiring or connection issues in the data bus circuit
3. Replace the powertrain control module (PCM) if deemed necessary
4. Clear the fault code from the PCM’s memory after completing the repairs

How to erase DTC P1627 on Audi

To erase DTC P1627 on an Audi, follow these steps:

1. Use a diagnostic scanner to access the PCM’s memory
2. Select the option to clear the fault codes stored in the PCM
3. Confirm the action and wait for the scanner to complete the process
4. Verify that the DTC P1627 code has been successfully erased

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.