Audi DTC P1716 – Wheel Speed Signal 2 Range/Performance
DTC P1716 meaning on Audi
The Diagnostic Trouble Code (DTC) P1716 for Audi indicates a Wheel Speed Signal 2 Range/Performance issue. This means that the control module has detected a problem with the signal from the second wheel speed sensor, which is crucial for the proper functioning of the vehicle’s traction control and anti-lock braking systems.
Audi DTC P1716 symptoms
Symptoms of DTC P1716 on an Audi may include:
- ABS warning light illuminated on the dashboard
- Traction control system malfunction
- Unusual braking behavior, such as pulsation or loss of braking power
- Decreased stability while driving
Audi DTC P1716 causes
The common causes of DTC P1716 on an Audi include:
- Defective wheel speed sensor 2
- Faulty wiring or connectors related to the wheel speed sensor
- Corrosion or dirt affecting the sensor’s performance
- Issues with the control module interpreting the sensor signal
Audi DTC P1716 seriousness
The seriousness of DTC P1716 on an Audi lies in the compromised functionality of the vehicle’s safety systems. Ignoring or neglecting this issue can lead to unsafe driving conditions, reduced braking effectiveness, and potential loss of control over the vehicle, especially in slippery or emergency situations.
How to diagnose DTC P1716 on Audi
To diagnose DTC P1716 on an Audi, follow these steps:
- Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s control module
- Inspect the wheel speed sensor 2 and its wiring for any visible damage or corrosion
- Test the sensor’s output signal using a multimeter to ensure it is within the specified range
- Check the connections and terminals for proper contact and continuity
- Perform a road test to observe the system’s behavior and confirm the issue
How to fix DTC P1716 on Audi
To fix DTC P1716 on an Audi, consider the following solutions:
- Replace the faulty wheel speed sensor 2 with a new, OEM part
- Repair or replace any damaged wiring or connectors associated with the sensor
- Clean the sensor and its mounting area from any dirt or debris that may affect its performance
- Reset the fault codes using a diagnostic scanner after completing the repairs
How to erase DTC P1716 on Audi
To erase DTC P1716 on an Audi, follow these steps:
- Connect a diagnostic scanner to the vehicle’s OBD-II port
- Access the scanner’s menu to clear the fault codes stored in the control module
- Confirm the deletion of the DTC P1716 by checking for any remaining codes
- If the issue has been resolved, the ABS warning light should turn off
Recommended tools for Audi diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.