P1772 – Audi DTC

Audi DTC P1772 – Load Signal Stuck On

DTC P1772 meaning on Audi

DTC P1772 on an Audi indicates that the Load Signal is stuck on. This means that the Engine Control Module (ECM) is receiving a continuous signal indicating a high load condition, even when the load on the engine is not actually high. This can lead to incorrect fuel delivery and ignition timing, affecting the engine’s performance and efficiency.

Audi DTC P1772 symptoms

Symptoms of DTC P1772 on an Audi may include:

• Check Engine Light (CEL) illuminated
• Reduced engine power
• Poor fuel efficiency
• Engine hesitation or stalling

Audi DTC P1772 causes

The common causes of DTC P1772 on an Audi include:

• Faulty Load Signal sensor
• Wiring issues or poor connections in the Load Signal circuit
• ECM software or hardware malfunction

Audi DTC P1772 seriousness

DTC P1772 should not be ignored as it can lead to poor engine performance and reduced fuel efficiency. Continuing to drive with this fault may cause further damage to engine components over time.

How to diagnose DTC P1772 on Audi

To diagnose DTC P1772 on an Audi, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and freeze frame data
2. Inspect the Load Signal sensor and its wiring for any visible damage or corrosion
3. Check the ECM for any stored codes related to the Load Signal circuit
4. Perform a thorough visual inspection of the engine bay for any signs of damage or loose connections

How to fix DTC P1772 on Audi

To fix DTC P1772 on an Audi, the following steps may be taken:

1. Replace the faulty Load Signal sensor if it is determined to be the cause
2. Repair any damaged wiring or connections in the Load Signal circuit
3. Update the ECM software to the latest version, if applicable
4. Clear the fault code and perform a test drive to ensure the issue has been resolved

How to erase DTC P1772 on Audi

To erase DTC P1772 on an Audi, follow these steps:

1. Use a diagnostic scanner to clear the fault code from the ECM memory
2. Perform a test drive to ensure the fault code does not return
3. If the fault code reappears, further diagnosis and repairs may be necessary

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.