P1795 – Audi DTC

Audi DTC P1795 – Vehicle Speed Signal Circuit Open

DTC P1795 meaning on Audi

DTC P1795 on an Audi indicates a fault in the vehicle speed signal circuit, specifically an open circuit. This means that the Engine Control Module (ECM) is not receiving the expected signal related to the vehicle’s speed.

Audi DTC P1795 symptoms

Symptoms of DTC P1795 on an Audi may include:

• Malfunction indicator lamp (MIL) or check engine light illuminated on the dashboard
• Speedometer not working or erratic speedometer readings
• Transmission shifting issues
• Limp mode activation

Audi DTC P1795 causes

Common causes of DTC P1795 on an Audi include:

• Faulty vehicle speed sensor
• Corroded or damaged wiring in the vehicle speed signal circuit
• Loose or poor connections in the circuit
• Defective ECM

Audi DTC P1795 seriousness

DTC P1795 should not be ignored as it can lead to inaccurate speed readings, transmission issues, and potential safety concerns. It is recommended to address this fault promptly to ensure the proper functioning of the vehicle.

How to diagnose DTC P1795 on Audi

To diagnose DTC P1795 on an Audi, you can follow these steps:

1. Use a diagnostic scanner to retrieve the fault code and related data.
2. Inspect the vehicle speed sensor and its wiring for any visible damage or corrosion.
3. Check the connections in the vehicle speed signal circuit for tightness and cleanliness.
4. If necessary, perform a continuity test on the wiring to identify any open circuits.
5. If the issue persists, further diagnostic procedures may be required to pinpoint the exact cause.

How to fix DTC P1795 on Audi

To fix DTC P1795 on an Audi, you can consider the following actions:

1. Replace the faulty vehicle speed sensor if it is determined to be the cause of the fault.
2. Repair or replace any damaged or corroded wiring in the vehicle speed signal circuit.
3. Ensure all connections in the circuit are secure and free of debris.
4. If the ECM is found to be defective, it may need to be replaced or reprogrammed.
5. After addressing the root cause, clear the fault code and test the vehicle to ensure the issue has been resolved.

How to erase DTC P1795 on Audi

To erase DTC P1795 on an Audi, you can use a diagnostic scanner to clear the fault code from the ECM’s memory. After making the necessary repairs and confirming that the issue has been resolved, you can reset the fault code to turn off the MIL or check engine light.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.