P1842 – Audi DTC

Audi DTC P1842 – Please check DTC Memory of instrument panel ECU

DTC P1842 meaning on Audi

DTC P1842 on an Audi refers to a fault with the transmission fluid pressure sensor circuit. This diagnostic trouble code indicates that the signal from the transmission fluid pressure sensor is out of the expected range or has a performance problem.

Audi DTC P1842 symptoms

Common symptoms associated with DTC P1842 on an Audi may include:

• Check Engine Light illuminated on the dashboard
• Transmission shifting issues
• Harsh or delayed shifting
• Reduced fuel efficiency

Audi DTC P1842 causes

The potential causes of DTC P1842 on an Audi can include:

• Faulty transmission fluid pressure sensor
• Wiring or connector issues in the sensor circuit
• Low transmission fluid level or poor quality fluid
• Internal transmission problems

Audi DTC P1842 seriousness

DTC P1842 should be addressed promptly to prevent potential damage to the transmission system. Ignoring this fault could lead to further transmission issues and potentially costly repairs.

How to diagnose DTC P1842 on Audi

To diagnose DTC P1842 on an Audi, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and related data
2. Inspect the transmission fluid pressure sensor and its wiring for any visible damage
3. Check the transmission fluid level and quality
4. Perform a test drive to observe the transmission’s behavior

How to fix DTC P1842 on Audi

Depending on the root cause of DTC P1842, the following steps may be taken to fix the issue:

1. Replace the faulty transmission fluid pressure sensor
2. Repair or replace damaged wiring or connectors in the sensor circuit
3. Ensure the transmission fluid level is correct and of the recommended quality
4. If internal transmission problems are found, further diagnostics and repairs may be necessary

How to erase DTC P1842 on Audi

After the issue causing DTC P1842 has been resolved, the fault code can be cleared from the Audi’s memory using a diagnostic scanner. This will turn off the Check Engine Light and reset the system for monitoring future faults.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.