P1863 – Audi DTC

Audi DTC P1863 – Data Bus Powertrain Missing Message from Steering Angle Sensor

DTC P1863 meaning on Audi

The Diagnostic Trouble Code (DTC) P1863 on an Audi indicates a communication error related to the Data Bus Powertrain Missing Message from the Steering Angle Sensor. This means that the Powertrain Control Module (PCM) is not receiving the necessary data from the steering angle sensor, which is crucial for various vehicle systems to function properly.

Audi DTC P1863 symptoms

Symptoms of DTC P1863 on an Audi may include:

• Malfunction indicator lamp (MIL) or check engine light illuminated on the dashboard
• Loss of power steering assistance
• Inaccurate or erratic steering behavior
• Difficulty in engaging certain driving modes

Audi DTC P1863 causes

Common causes of DTC P1863 on an Audi include:

• Faulty steering angle sensor
• Wiring or connection issues between the steering angle sensor and the PCM
• PCM software or hardware malfunction

Audi DTC P1863 seriousness

The seriousness of DTC P1863 on an Audi depends on the driving conditions and the extent of the communication failure. Ignoring this issue can lead to potential safety hazards, such as loss of steering control or compromised vehicle stability. It is recommended to address this problem promptly to ensure safe driving conditions.

How to diagnose DTC P1863 on Audi

To diagnose DTC P1863 on an Audi, follow these steps:

1. Use an OBD-II scanner to retrieve the fault codes and verify the presence of P1863.
2. Inspect the wiring and connections related to the steering angle sensor for any visible damage or corrosion.
3. Perform a visual inspection of the steering angle sensor itself to check for physical damage or misalignment.
4. Test the steering angle sensor using a multimeter to ensure it is functioning within specifications.
5. If necessary, perform a diagnostic scan tool test to check the communication between the sensor and the PCM.

How to fix DTC P1863 on Audi

To fix DTC P1863 on an Audi, consider the following steps:

1. Replace the faulty steering angle sensor if it is determined to be the root cause of the communication error.
2. Repair or replace any damaged wiring or connectors associated with the steering angle sensor.
3. If the PCM is suspected to be the issue, consult a professional mechanic or dealership for further diagnosis and potential replacement.

How to erase DTC P1863 on Audi

To erase DTC P1863 on an Audi, follow these steps:

1. Use an OBD-II scanner to clear the fault codes stored in the PCM memory.
2. After clearing the codes, perform a test drive to ensure the issue has been resolved and the MIL or check engine light does not reappear.
3. If the fault code persists after clearing, further diagnosis may be required to address any underlying issues.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.