P2004 – Audi DTC

Audi DTC P2004 – A failed IMRC actuator, A problem with the intake manifold or linkage, Wiring issues

DTC P2004 meaning on Audi

DTC P2004 refers to a problem with the Intake Manifold Runner Control (IMRC) system in Audi vehicles. This code indicates that the IMRC actuator is malfunctioning or that there is an issue with the intake manifold or its linkage. The IMRC system is responsible for optimizing airflow into the engine, which helps improve performance and efficiency.

Audi DTC P2004 symptoms

Common symptoms associated with DTC P2004 may include:

• Check Engine Light illuminated
• Reduced engine performance
• Rough idling or stalling
• Increased fuel consumption
• Unusual engine noises

Audi DTC P2004 causes

Several factors can lead to the DTC P2004 code, including:

• Failed IMRC actuator
• Damaged or disconnected linkage
• Faulty intake manifold
• Wiring issues, such as shorts or open circuits
• Vacuum leaks affecting the IMRC system

Audi DTC P2004 seriousness

The seriousness of DTC P2004 can vary, but it is generally considered a moderate issue. While it may not cause immediate engine failure, it can lead to:

• Decreased engine performance
• Increased emissions
• Potential long-term damage if left unaddressed

How to diagnose DTC P2004 on Audi

To diagnose DTC P2004, follow these steps:

1. Use an OBD-II scanner to confirm the DTC and check for any additional codes.
2. Inspect the IMRC actuator and linkage for visible damage or disconnection.
3. Check the wiring and connectors for signs of wear, corrosion, or shorts.
4. Test the IMRC actuator operation using a multimeter or by applying direct voltage.
5. Inspect the intake manifold for cracks or leaks.

How to fix DTC P2004 on Audi step-by-step instructions

To fix DTC P2004, follow these steps:

1. Address any wiring issues by repairing or replacing damaged wires and connectors.
2. If the IMRC actuator is faulty, replace it with a new unit.
3. Reattach or replace any damaged linkage components.
4. Repair or replace the intake manifold if it is cracked or leaking.
5. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC P2004 on Audi

To erase DTC P2004, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the engine to verify that the code does not return.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.