P2006 – Audi DTC

Audi DTC P2006 – Intake manifold runner control actuator failure, Powertrain Control Module (PCM) failure, Restricted vacuum lines

DTC P2006 meaning on Audi

DTC P2006 refers to a fault code indicating a problem with the intake manifold runner control (IMRC) actuator in Audi vehicles. This system is responsible for optimizing the airflow into the engine by adjusting the position of the intake manifold runners. When the PCM detects that the actuator is not functioning correctly, it triggers this diagnostic trouble code.

Audi DTC P2006 symptoms

Common symptoms associated with DTC P2006 may include:

• Check Engine Light illuminated
• Reduced engine performance
• Rough idling or stalling
• Increased fuel consumption
• Unusual engine noises

Audi DTC P2006 causes

Several factors can lead to the activation of DTC P2006, including:

• Failure of the intake manifold runner control actuator
• Malfunctioning Powertrain Control Module (PCM)
• Restricted or damaged vacuum lines
• Electrical issues such as short circuits or open circuits in the actuator circuit
• Carbon buildup in the intake manifold

Audi DTC P2006 seriousness

DTC P2006 is considered a moderate to serious issue. While it may not cause immediate engine failure, it can lead to:

• Decreased engine efficiency
• Increased emissions
• Potential long-term damage to engine components
• Failure to pass emissions tests

How to diagnose DTC P2006 on Audi

To diagnose DTC P2006, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P2006 code.
2. Inspect the intake manifold runner control actuator for physical damage.
3. Check the electrical connections and wiring for signs of wear or corrosion.
4. Test the actuator’s functionality using a multimeter.
5. Examine vacuum lines for blockages or leaks.
6. Clear the code and perform a test drive to see if the code reappears.

How to fix DTC P2006 on Audi step-by-step instructions

To fix DTC P2006, follow these step-by-step instructions:

1. Disconnect the battery to ensure safety.
2. Inspect and replace any damaged vacuum lines.
3. Repair or replace the intake manifold runner control actuator if faulty.
4. Check and repair any electrical issues in the actuator circuit.
5. Clean the intake manifold to remove carbon buildup.
6. Reconnect the battery and clear the DTC using an OBD-II scanner.
7. Test drive the vehicle to ensure the issue is resolved.

How to erase DTC P2006 on Audi

To erase DTC P2006, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to verify that the code does not return.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.