Audi DTC P2210 – NOx sensor failure, Powertrain Control Module (PCM) failure, Wiring issue
DTC P2210 meaning on Audi
DTC P2210 refers to a diagnostic trouble code indicating a problem with the NOx (Nitrogen Oxide) sensor in Audi vehicles. This code specifically points to a malfunction in the NOx sensor circuit, which is crucial for monitoring emissions and ensuring the engine runs efficiently. The NOx sensor measures the amount of nitrogen oxides in the exhaust gases, helping the engine control module (ECM) adjust the air-fuel mixture for optimal combustion.
Audi DTC P2210 symptoms
When DTC P2210 is triggered, several symptoms may be observed, including:
- Check Engine Light illuminated
- Increased emissions
- Reduced engine performance
- Decreased fuel efficiency
- Rough idling or stalling
- Failed emissions test
Audi DTC P2210 causes
There are several potential causes for DTC P2210, including:
- Faulty NOx sensor
- Powertrain Control Module (PCM) failure
- Wiring issues, such as damaged or corroded connectors
- Faulty exhaust system components
- Contaminated or blocked exhaust gas
Audi DTC P2210 seriousness
DTC P2210 is considered a serious issue as it can lead to increased emissions and potential engine damage if not addressed. Ignoring this code may result in:
- Failing emissions tests
- Higher fuel consumption
- Long-term damage to the engine or exhaust system
- Legal penalties in regions with strict emissions regulations
How to diagnose DTC P2210 on Audi
To diagnose DTC P2210, follow these steps:
- Use an OBD-II scanner to confirm the presence of the P2210 code.
- Inspect the NOx sensor and its wiring for any visible damage or corrosion.
- Check the PCM for any software updates or faults.
- Test the NOx sensor using a multimeter to ensure it is functioning within specifications.
- Examine the exhaust system for blockages or leaks.
How to fix DTC P2210 on Audi step-by-step instructions
To fix DTC P2210, follow these step-by-step instructions:
- Clear the DTC using an OBD-II scanner.
- If the code reappears, replace the faulty NOx sensor.
- Repair or replace any damaged wiring or connectors related to the NOx sensor.
- Update the PCM software if necessary.
- Inspect and repair any exhaust system issues.
- Perform a test drive to ensure the issue is resolved and the code does not return.
How to erase DTC P2210 on Audi
To erase DTC P2210, follow these steps:
- Connect an OBD-II scanner to the vehicle’s diagnostic port.
- Turn on the ignition without starting the engine.
- Access the diagnostic menu on the scanner.
- Select the option to clear or erase trouble codes.
- Confirm the action and wait for the scanner to complete the process.
- Disconnect the scanner and start the engine to check if the code returns.
Recommended tools for Audi diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.