P2237 – Audi DTC

Audi DTC P2237 – Exhaust leak, Oxygen sensor failure, Powertrain Control Module (PCM) failure, Wiring issue

DTC P2237 meaning on Audi

DTC P2237 refers to a specific diagnostic trouble code that indicates a problem with the oxygen sensor circuit. This code is triggered when the Powertrain Control Module (PCM) detects an abnormal voltage signal from the oxygen sensor, which is responsible for monitoring the exhaust gases and ensuring optimal engine performance and emissions control.

Audi DTC P2237 symptoms

Common symptoms associated with DTC P2237 may include:

• Check Engine Light illuminated
• Decreased fuel efficiency
• Rough engine idle
• Increased emissions
• Engine performance issues, such as hesitation or stalling

Audi DTC P2237 causes

Several factors can lead to the triggering of DTC P2237, including:

• Exhaust leaks that affect the oxygen sensor readings
• Faulty oxygen sensor that is unable to provide accurate readings
• Powertrain Control Module (PCM) failure or malfunction
• Wiring issues, such as damaged or corroded wires in the oxygen sensor circuit

Audi DTC P2237 seriousness

DTC P2237 is considered a serious issue as it can lead to:

• Increased emissions, which may cause the vehicle to fail emissions testing
• Potential engine damage due to improper air-fuel mixture
• Reduced fuel efficiency, leading to higher operating costs
• Overall poor vehicle performance

How to diagnose DTC P2237 on Audi

To diagnose DTC P2237, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC P2237.
2. Inspect the oxygen sensor and its wiring for any visible damage or corrosion.
3. Check for exhaust leaks near the oxygen sensor.
4. Test the voltage output of the oxygen sensor using a multimeter.
5. Examine the PCM for any signs of failure or software issues.

How to fix DTC P2237 on Audi step-by-step instructions

To fix DTC P2237, follow these steps:

1. Repair or replace any damaged wiring or connectors in the oxygen sensor circuit.
2. Fix any exhaust leaks that may be affecting the oxygen sensor readings.
3. If the oxygen sensor is faulty, replace it with a new one.
4. Check and, if necessary, reprogram or replace the PCM if it is determined to be faulty.
5. Clear the DTC using an OBD-II scanner and perform a test drive to ensure the issue is resolved.

How to erase DTC P2237 on Audi

To erase DTC P2237, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the DTC menu on the scanner.
4. Select the option to clear or erase the trouble codes.
5. Confirm the action and wait for the scanner to complete the process.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.