P2302 – Audi DTC

Audi DTC P2302 – Ignition coil failure, Powertrain Control Module (PCM) failure, Wiring issue

DTC P2302 meaning on Audi

DTC P2302 indicates a problem with the ignition coil circuit in Audi vehicles. This code specifically points to a failure in the ignition coil, which is responsible for generating the high voltage needed to ignite the air-fuel mixture in the engine’s cylinders. When this code is triggered, it suggests that the Powertrain Control Module (PCM) has detected an issue with the ignition coil’s performance or its electrical circuit.

Audi DTC P2302 symptoms

Common symptoms associated with DTC P2302 may include:

• Engine misfires
• Rough idling
• Decreased engine performance
• Check Engine Light illuminated
• Difficulty starting the engine

Audi DTC P2302 causes

The causes of DTC P2302 can include:

• Faulty ignition coil
• Powertrain Control Module (PCM) failure
• Wiring issues, such as damaged or corroded connectors
• Short circuits in the ignition coil circuit
• Open circuits in the ignition coil circuit

Audi DTC P2302 seriousness

DTC P2302 is considered a serious issue as it can lead to engine misfires, which may cause further damage to the engine over time. Ignoring this code can result in poor fuel economy, increased emissions, and potential damage to other engine components. It is advisable to address this issue promptly to maintain optimal vehicle performance.

How to diagnose DTC P2302 on Audi

To diagnose DTC P2302, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC P2302.
2. Inspect the ignition coil and its wiring for visible damage or corrosion.
3. Check the resistance of the ignition coil using a multimeter to ensure it is within specifications.
4. Test the PCM for proper operation and ensure it is receiving the correct signals.
5. Perform a continuity test on the wiring harness to check for shorts or opens.

How to fix DTC P2302 on Audi step-by-step instructions

To fix DTC P2302, follow these step-by-step instructions:

1. Disconnect the negative battery terminal to ensure safety.
2. Inspect and repair any damaged wiring or connectors related to the ignition coil.
3. If the ignition coil is faulty, replace it with a new one.
4. Reconnect the wiring harness and ensure all connections are secure.
5. Reconnect the negative battery terminal.
6. Clear the DTC using an OBD-II scanner.
7. Start the engine and monitor for any reoccurrence of the code.

How to erase DTC P2302 on Audi

To erase DTC P2302, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the ‘Erase Codes’ or ‘Clear DTCs’ option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.