P2303 – Audi DTC

Audi DTC P2303 – Ignition coil failure, Powertrain Control Module (PCM) failure, Wiring issue

DTC P2303 meaning on Audi

DTC P2303 refers to a specific diagnostic trouble code that indicates an issue with the ignition coil circuit in Audi vehicles. This code is triggered when the Powertrain Control Module (PCM) detects a malfunction in the ignition coil’s primary or secondary circuit. The ignition coil is responsible for converting the battery’s low voltage into the high voltage needed to ignite the air-fuel mixture in the engine’s cylinders.

Audi DTC P2303 symptoms

Common symptoms associated with DTC P2303 may include:

• Engine misfires
• Rough idling
• Decreased engine performance
• Increased fuel consumption
• Check Engine Light illuminated

Audi DTC P2303 causes

The causes of DTC P2303 can include:

• Ignition coil failure
• Powertrain Control Module (PCM) failure
• Wiring issues, such as damaged or corroded connectors
• Faulty spark plugs
• Issues with the ignition system components

Audi DTC P2303 seriousness

DTC P2303 is considered a serious issue as it can lead to engine misfires, which may cause further damage to the engine over time. Ignoring this code can result in poor engine performance, increased emissions, and potential failure of other engine components. It is advisable to address this issue promptly to maintain vehicle reliability and performance.

How to diagnose DTC P2303 on Audi

To diagnose DTC P2303, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC P2303.
2. Inspect the ignition coil and wiring for visible damage or corrosion.
3. Check the PCM for any additional trouble codes that may provide more context.
4. Test the ignition coil’s resistance using a multimeter to ensure it is within specifications.
5. Examine the spark plugs for wear or damage.
6. Perform a continuity test on the wiring harness connected to the ignition coil.

How to fix DTC P2303 on Audi step-by-step instructions

To fix DTC P2303, follow these step-by-step instructions:

1. Disconnect the negative battery terminal to ensure safety.
2. Inspect and repair any damaged wiring or connectors related to the ignition coil.
3. If the ignition coil is faulty, replace it with a new one.
4. Replace any worn or damaged spark plugs.
5. Reconnect the battery terminal.
6. Clear the DTC using an OBD-II scanner.
7. Start the engine and monitor for any reoccurrence of the code.

How to erase DTC P2303 on Audi

To erase DTC P2303, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the ‘Erase Codes’ or ‘Clear DTCs’ option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.