P2305 – Audi DTC

Audi DTC P2305 – Ignition coil failure, Powertrain Control Module (PCM) failure, Wiring issue

DTC P2305 meaning on Audi

DTC P2305 refers to a diagnostic trouble code that indicates a problem with the ignition coil circuit. Specifically, it signifies that the Powertrain Control Module (PCM) has detected a malfunction in the ignition coil’s primary or secondary circuit. This code is often associated with misfires, poor engine performance, and increased emissions.

Audi DTC P2305 symptoms

Common symptoms associated with DTC P2305 may include:

• Engine misfires
• Rough idling
• Decreased engine performance
• Increased fuel consumption
• Check Engine Light illuminated
• Difficulty starting the engine

Audi DTC P2305 causes

The causes of DTC P2305 can include:

• Faulty ignition coil
• Defective Powertrain Control Module (PCM)
• Wiring issues, such as damaged or corroded connectors
• Short circuits in the ignition coil circuit
• Open circuits in the ignition coil circuit

Audi DTC P2305 seriousness

DTC P2305 is considered a serious issue as it can lead to engine misfires, which may cause further damage to the engine and exhaust system. Ignoring this code can result in poor engine performance, increased emissions, and potential failure of other components. It is advisable to address this issue promptly to avoid more extensive repairs.

How to diagnose DTC P2305 on Audi

To diagnose DTC P2305, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC P2305.
2. Inspect the ignition coil and its wiring for visible damage or corrosion.
3. Check the PCM for any additional trouble codes that may provide more context.
4. Test the ignition coil’s resistance using a multimeter to ensure it is within specifications.
5. Examine the wiring harness for continuity and shorts.
6. Perform a visual inspection of connectors and terminals for corrosion or loose connections.

How to fix DTC P2305 on Audi step-by-step instructions

To fix DTC P2305, follow these step-by-step instructions:

1. Disconnect the negative battery terminal to ensure safety.
2. Inspect and repair any damaged wiring or connectors related to the ignition coil.
3. If the ignition coil is faulty, replace it with a new one.
4. Check the PCM for updates or faults replace if necessary.
5. Reconnect all connectors and wiring securely.
6. Reconnect the negative battery terminal.
7. Clear the DTC using an OBD-II scanner and test drive the vehicle to see if the code returns.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.