P2308 – Audi DTC

Audi DTC P2308 – Ignition coil failure, Powertrain Control Module (PCM) failure, Wiring issue

DTC P2308 meaning on Audi

DTC P2308 indicates a problem related to the ignition coil circuit in Audi vehicles. This code specifically points to a failure in the ignition coil, which is responsible for generating the high voltage needed to ignite the air-fuel mixture in the engine’s cylinders. The code may also suggest issues with the Powertrain Control Module (PCM) or wiring related to the ignition system.

Audi DTC P2308 symptoms

Common symptoms associated with DTC P2308 may include:

• Engine misfires
• Rough idling
• Decreased engine performance
• Check Engine Light illuminated
• Difficulty starting the engine

Audi DTC P2308 causes

The causes of DTC P2308 can include:

• Faulty ignition coil
• Defective Powertrain Control Module (PCM)
• Wiring issues such as shorts or open circuits
• Corroded or loose connectors
• Faulty spark plugs

Audi DTC P2308 seriousness

DTC P2308 is considered a serious issue as it can lead to engine misfires, which may cause further damage to the engine over time. Ignoring this code can result in poor fuel economy, increased emissions, and potential damage to other engine components. It is advisable to address this issue promptly to maintain vehicle performance and reliability.

How to diagnose DTC P2308 on Audi

To diagnose DTC P2308, follow these steps:

1. Use an OBD-II scanner to confirm the DTC and check for any additional codes.
2. Inspect the ignition coil and wiring for visible damage or corrosion.
3. Test the ignition coil with a multimeter to ensure it is functioning correctly.
4. Check the PCM for any signs of failure or software issues.
5. Examine the connectors and wiring harness for loose connections or shorts.

How to fix DTC P2308 on Audi step-by-step instructions

To fix DTC P2308, follow these steps:

1. Replace the faulty ignition coil if testing indicates failure.
2. Repair or replace any damaged wiring or connectors.
3. Check and replace spark plugs if they are worn or damaged.
4. Reprogram or replace the PCM if it is determined to be defective.
5. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC P2308 on Audi

To erase DTC P2308, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the DTC menu on the scanner.
4. Select the option to clear or erase the codes.
5. Turn off the ignition and disconnect the scanner.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.