P2310 – Audi DTC

Audi DTC P2310 – Ignition coil failure, Powertrain Control Module (PCM) failure, Wiring issue

DTC P2310 meaning on Audi

DTC P2310 refers to an issue related to the ignition coil circuit in Audi vehicles. This code indicates that the Powertrain Control Module (PCM) has detected a malfunction in the ignition coil system, which is responsible for generating the high voltage needed to ignite the air-fuel mixture in the engine’s cylinders. The specific nature of the fault can vary, but it generally points to a failure in the ignition coil, the PCM itself, or the wiring associated with these components.

Audi DTC P2310 symptoms

Common symptoms associated with DTC P2310 may include:

• Engine misfires
• Rough idling
• Decreased engine performance
• Illuminated check engine light
• Difficulty starting the engine

Audi DTC P2310 causes

The causes of DTC P2310 can include:

• Faulty ignition coil
• Defective Powertrain Control Module (PCM)
• Wiring issues such as shorts or open circuits
• Corroded or loose connectors
• Faulty spark plugs

Audi DTC P2310 seriousness

DTC P2310 is considered a serious issue as it can lead to engine misfires, which may cause further damage to the engine over time. If left unaddressed, it can result in poor fuel economy, increased emissions, and potential damage to the catalytic converter. It is advisable to diagnose and repair the issue promptly to maintain vehicle performance and reliability.

How to diagnose DTC P2310 on Audi

To diagnose DTC P2310, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC P2310.
2. Inspect the ignition coil and wiring for visible damage or corrosion.
3. Check the connectors for secure connections and signs of wear.
4. Test the ignition coil with a multimeter to ensure it is functioning correctly.
5. Examine the PCM for any signs of failure or damage.
6. Perform a continuity test on the wiring to check for shorts or open circuits.

How to fix DTC P2310 on Audi step-by-step instructions

To fix DTC P2310, follow these steps:

1. Disconnect the battery to ensure safety while working on the electrical system.
2. Inspect and replace any damaged ignition coils.
3. Repair or replace any faulty wiring or connectors.
4. Test and, if necessary, replace the PCM if it is found to be defective.
5. Reinstall all components and ensure all connections are secure.
6. Reconnect the battery and start the engine to check for any remaining issues.

How to erase DTC P2310 on Audi

To erase DTC P2310, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the DTC menu on the scanner.
4. Select the option to clear or erase the trouble codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.