P2422 – Audi DTC

Audi DTC P2422 – EVAP vent valve failure, Powertrain Control Module (PCM) failure, Wiring issue

DTC P2422 meaning on Audi

DTC P2422 refers to a diagnostic trouble code that indicates a failure in the EVAP (Evaporative Emission Control System) vent valve. This code is specific to the vent valve’s performance, which is responsible for controlling the flow of fuel vapors from the fuel tank to the engine for combustion. When the PCM detects that the vent valve is not functioning correctly, it triggers this code.

Audi DTC P2422 symptoms

Common symptoms associated with DTC P2422 may include:

• Check Engine Light illuminated
• Failed emissions test
• Fuel odor near the vehicle
• Decreased fuel efficiency
• Rough idling or stalling

Audi DTC P2422 causes

The causes of DTC P2422 can include:

• Faulty EVAP vent valve
• Powertrain Control Module (PCM) failure
• Wiring issues, such as damaged or corroded connectors
• Clogged or damaged EVAP system components
• Vacuum leaks in the EVAP system

Audi DTC P2422 seriousness

DTC P2422 is considered a moderate issue. While it may not cause immediate engine failure, it can lead to:

• Increased emissions
• Potential damage to the EVAP system
• Failure to pass emissions testing
• Reduced fuel efficiency

How to diagnose DTC P2422 on Audi

To diagnose DTC P2422, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC P2422.
2. Inspect the EVAP vent valve for physical damage or blockage.
3. Check the wiring and connectors for signs of wear, corrosion, or disconnection.
4. Test the EVAP vent valve operation using a multimeter.
5. Perform a smoke test to identify any vacuum leaks in the EVAP system.
6. Examine the PCM for any software updates or faults.

How to fix DTC P2422 on Audi step-by-step instructions

To fix DTC P2422, follow these steps:

1. Replace the faulty EVAP vent valve if it is determined to be defective.
2. Repair or replace any damaged wiring or connectors in the EVAP system.
3. Clear any blockages in the EVAP system components.
4. Seal any vacuum leaks found during the diagnosis.
5. Recheck the system for proper operation after repairs.

How to erase DTC P2422 on Audi

To erase DTC P2422, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to verify that the code does not return.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.