P2609 – Audi DTC

Audi DTC P2609 – Intake air heater, Powertrain Control Module (PCM) failure, Wiring issue

DTC P2609 meaning on Audi

DTC P2609 refers to a diagnostic trouble code indicating a problem with the intake air heater circuit in Audi vehicles. This code specifically points to a failure in the Powertrain Control Module (PCM) or issues related to the wiring of the intake air heater. The intake air heater is responsible for warming the air entering the engine, which can improve cold start performance and reduce emissions.

Audi DTC P2609 symptoms

Common symptoms associated with DTC P2609 may include:

• Check Engine Light illuminated
• Difficulty starting the engine, especially in cold weather
• Increased emissions
• Rough idling or stalling
• Reduced engine performance

Audi DTC P2609 causes

The causes of DTC P2609 can include:

• Faulty intake air heater
• Defective Powertrain Control Module (PCM)
• Wiring issues such as shorts, opens, or corrosion in the intake air heater circuit
• Bad connectors or poor electrical connections
• Blown fuses related to the intake air heater circuit

Audi DTC P2609 seriousness

DTC P2609 can be considered serious as it may affect engine performance and emissions. If left unaddressed, it can lead to further engine issues, increased fuel consumption, and potential damage to the engine components. It is advisable to diagnose and repair the issue promptly to maintain optimal vehicle performance.

How to diagnose DTC P2609 on Audi

To diagnose DTC P2609, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC P2609.
2. Inspect the intake air heater and its wiring for visible damage or corrosion.
3. Check the PCM for any additional trouble codes that may provide more context.
4. Test the intake air heater for proper operation using a multimeter.
5. Examine the electrical connections and wiring harness for continuity and shorts.
6. Clear the code and perform a road test to see if the code reappears.

How to fix DTC P2609 on Audi step-by-step instructions

To fix DTC P2609, follow these steps:

1. Disconnect the battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors related to the intake air heater.
3. Replace the intake air heater if it is found to be faulty.
4. Check and replace any blown fuses associated with the intake air heater circuit.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Perform a road test to ensure the issue is resolved and the code does not return.

How to erase DTC P2609 on Audi

To erase DTC P2609, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the trouble codes section on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to indicate that the codes have been cleared.
6. Disconnect the scanner and start the engine to verify that the Check Engine Light is off.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.