P2610 – Audi DTC

Audi DTC P2610 – An internal PCM problem, A problem with the PCM power or ground circuit

DTC P2610 meaning on Audi

DTC P2610 indicates an internal problem with the Powertrain Control Module (PCM) in Audi vehicles. This code suggests that there is an issue with the PCM’s power or ground circuit, which can lead to improper functioning of the engine management system. The PCM is responsible for controlling various engine functions, and any malfunction can affect vehicle performance.

Audi DTC P2610 symptoms

Common symptoms associated with DTC P2610 may include:

• Check Engine Light illuminated
• Engine stalling or misfiring
• Poor fuel economy
• Difficulty starting the engine
• Unresponsive throttle

Audi DTC P2610 causes

Several factors can lead to the occurrence of DTC P2610, including:

• Faulty PCM
• Corroded or damaged wiring in the PCM power or ground circuit
• Loose or poor connections in the electrical system
• Short circuits or open circuits in the wiring
• Faulty sensors that may affect the PCM operation

Audi DTC P2610 seriousness

DTC P2610 is considered a serious issue as it indicates a malfunction within the PCM. If not addressed, it can lead to:

• Increased emissions
• Engine performance issues
• Potential engine damage
• Failure to pass emissions tests

How to diagnose DTC P2610 on Audi

To diagnose DTC P2610, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC P2610.
2. Inspect the PCM power and ground circuits for any visible damage or corrosion.
3. Check the wiring harness and connectors for loose or damaged connections.
4. Test the voltage and ground at the PCM using a multimeter.
5. Perform a continuity test on the wiring to ensure there are no breaks.
6. If necessary, replace the PCM or repair any damaged wiring.

How to fix DTC P2610 on Audi step-by-step instructions

To fix DTC P2610, follow these steps:

1. Disconnect the battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors in the PCM power and ground circuits.
3. Reconnect any loose connections and ensure they are secure.
4. Test the PCM for proper voltage and ground using a multimeter.
5. If the PCM is faulty, replace it with a new or refurbished unit.
6. Reconnect the battery and clear the DTC using an OBD-II scanner.
7. Test drive the vehicle to ensure the issue is resolved and the check engine light does not reappear.

How to erase DTC P2610 on Audi

To erase DTC P2610, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the DTC menu on the scanner.
4. Select the option to clear or erase the trouble codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the engine to verify that the check engine light is off.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.