P2714 – Audi DTC

Audi DTC P2714 – Transmission Control Module (TCM) failure, Transmission fluid level is low, Transmission shift solenoid failure, Wiring issue

DTC P2714 meaning on Audi

DTC P2714 refers to a specific diagnostic trouble code related to the Transmission Control Module (TCM) in Audi vehicles. This code indicates that the TCM has detected a malfunction in the transmission system, particularly concerning the shift solenoids or the overall transmission performance. The TCM is responsible for managing the transmission’s operation, including gear shifts and fluid control, and any failure in this module can lead to significant transmission issues.

Audi DTC P2714 symptoms

When DTC P2714 is triggered, several symptoms may manifest, including:

• Delayed or harsh shifting between gears
• Transmission slipping or unexpected changes in gear
• Warning lights on the dashboard, particularly the check engine light
• Reduced acceleration or power loss
• Unusual noises from the transmission

Audi DTC P2714 causes

There are several potential causes for DTC P2714, including:

• Transmission Control Module (TCM) failure
• Low transmission fluid level
• Faulty transmission shift solenoid
• Wiring issues, such as damaged or corroded connectors
• Internal transmission problems, such as worn components

Audi DTC P2714 seriousness

DTC P2714 is considered a serious issue as it can lead to significant transmission problems if not addressed promptly. Ignoring this code may result in:

• Increased wear and tear on transmission components
• Complete transmission failure
• Unsafe driving conditions due to unpredictable shifting
• Higher repair costs if the issue escalates

How to diagnose DTC P2714 on Audi

To diagnose DTC P2714, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC P2714.
2. Check the transmission fluid level and condition.
3. Inspect the wiring and connectors related to the TCM and shift solenoids for damage.
4. Test the transmission shift solenoids for proper operation.
5. Examine the TCM for any signs of failure or malfunction.
6. Perform a road test to observe the transmission behavior.

How to fix DTC P2714 on Audi step-by-step instructions

To fix DTC P2714, follow these step-by-step instructions:

1. Check and top off the transmission fluid if it is low.
2. Inspect and repair any damaged wiring or connectors related to the TCM and shift solenoids.
3. Replace any faulty transmission shift solenoids.
4. If the TCM is determined to be faulty, replace it with a new or refurbished unit.
5. Clear the DTC using an OBD-II scanner.
6. Perform a road test to ensure the issue is resolved and monitor for any reoccurrence of the code.

How to erase DTC P2714 on Audi

To erase DTC P2714, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the diagnostic menu on the scanner.
4. Select the option to clear or erase trouble codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to check if the code returns.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.