P2716 – Audi DTC

Audi DTC P2716 – Transmission Control Module (TCM) failure, Transmission fluid level is low, Transmission shift solenoid failure, Wiring issue

DTC P2716 meaning on Audi

DTC P2716 refers to a problem with the Transmission Control Module (TCM) in Audi vehicles. This code indicates that the TCM has detected an issue related to the transmission’s performance, specifically concerning the shift solenoids. The TCM is responsible for managing the transmission’s operation, and any failure can lead to improper shifting or transmission performance issues.

Audi DTC P2716 symptoms

Common symptoms associated with DTC P2716 may include:

• Delayed or harsh shifting between gears
• Transmission slipping or failing to engage
• Warning lights illuminated on the dashboard
• Unusual noises from the transmission
• Reduced fuel efficiency

Audi DTC P2716 causes

Several factors can lead to the occurrence of DTC P2716, including:

• Transmission Control Module (TCM) failure
• Low transmission fluid level
• Faulty transmission shift solenoid
• Wiring issues, such as damaged or corroded connectors

Audi DTC P2716 seriousness

The seriousness of DTC P2716 can vary, but it is generally considered a significant issue. If left unaddressed, it can lead to:

• Severe transmission damage
• Complete transmission failure
• Increased repair costs
• Safety hazards while driving

How to diagnose DTC P2716 on Audi

To diagnose DTC P2716, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC P2716.
2. Check the transmission fluid level and condition.
3. Inspect the wiring and connectors related to the TCM and shift solenoids.
4. Test the transmission shift solenoids for proper operation.
5. Evaluate the TCM for any faults or failures.

How to fix DTC P2716 on Audi step-by-step instructions

To fix DTC P2716, follow these steps:

1. Check and top off the transmission fluid if it is low.
2. Inspect and repair any damaged wiring or connectors.
3. Replace any faulty transmission shift solenoids.
4. If necessary, replace the Transmission Control Module (TCM).
5. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC P2716 on Audi

To erase DTC P2716, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Access the diagnostic menu and locate the option to clear or erase codes.
3. Select DTC P2716 and confirm the deletion.
4. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.