P2810 – Audi DTC

Audi DTC P2810 – Transmission Control Module (TCM) failure, Transmission fluid level is low, Transmission pressure control solenoid failure, Wiring issue

DTC P2810 meaning on Audi

DTC P2810 refers to a specific diagnostic trouble code that indicates a problem with the Transmission Control Module (TCM) in Audi vehicles. This code is associated with issues related to the transmission pressure control solenoid, which is responsible for regulating the hydraulic pressure within the transmission. When the TCM detects a malfunction or failure in this system, it triggers the P2810 code, signaling that the transmission may not operate correctly.

Audi DTC P2810 symptoms

Common symptoms associated with DTC P2810 may include:

• Delayed or harsh shifting between gears
• Transmission slipping or failing to engage
• Warning lights illuminated on the dashboard
• Unusual noises from the transmission
• Reduced fuel efficiency

Audi DTC P2810 causes

Several factors can lead to the occurrence of DTC P2810, including:

• Transmission fluid level is low
• Transmission pressure control solenoid failure
• Wiring issues, such as damaged or corroded connectors
• Faulty Transmission Control Module (TCM)
• Internal transmission problems

Audi DTC P2810 seriousness

DTC P2810 is considered a serious issue as it can lead to significant transmission problems if not addressed promptly. Potential consequences include:

• Complete transmission failure
• Inability to drive the vehicle
• Increased repair costs due to further damage

How to diagnose DTC P2810 on Audi

To diagnose DTC P2810, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P2810 code.
2. Check the transmission fluid level and condition.
3. Inspect the wiring and connectors related to the TCM and solenoid for damage.
4. Test the transmission pressure control solenoid for proper operation.
5. Examine the TCM for faults or failures.

How to fix DTC P2810 on Audi step-by-step instructions

To fix DTC P2810, follow these steps:

1. Check and top off the transmission fluid if it is low.
2. Inspect and repair any damaged wiring or connectors.
3. Replace the transmission pressure control solenoid if it is faulty.
4. If necessary, replace the Transmission Control Module (TCM).
5. After repairs, clear the DTC using an OBD-II scanner.

How to erase DTC P2810 on Audi

To erase DTC P2810, perform the following steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Access the diagnostic menu and locate the option to clear or erase codes.
3. Select the option to erase DTCs.
4. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.