PP2002 – Audi DTC

Audi DTC PP2002 – Diesel Particulate Filter (DPF) failure, Intake air leak, Mass Airflow (MAF) sensor is dirty/loss of calibration

DTC PP2002 meaning on Audi

DTC PP2002 refers to a diagnostic trouble code indicating a failure related to the Diesel Particulate Filter (DPF) in Audi vehicles. This code signifies that the DPF is not functioning correctly, which can lead to increased emissions and potential engine performance issues. The DPF is responsible for capturing and storing soot and other particulate matter from the exhaust gases, and a failure can result in clogging or inefficiency in the filter’s operation.

Audi DTC PP2002 symptoms

Common symptoms associated with DTC PP2002 may include:

• Illuminated check engine light
• Reduced engine power or performance
• Increased exhaust smoke
• Frequent regeneration cycles of the DPF
• Unusual engine noises

Audi DTC PP2002 causes

Several factors can lead to the triggering of DTC PP2002, including:

• Clogged or damaged Diesel Particulate Filter
• Intake air leaks affecting engine performance
• Dirty or malfunctioning Mass Airflow (MAF) sensor
• Faulty exhaust pressure sensor
• Issues with the engine management system

Audi DTC PP2002 seriousness

The seriousness of DTC PP2002 should not be underestimated. If left unaddressed, it can lead to:

• Increased emissions, potentially failing emissions tests
• Severe engine damage due to excessive soot buildup
• Reduced fuel efficiency
• Potential for more costly repairs if the issue escalates

How to diagnose DTC PP2002 on Audi

To diagnose DTC PP2002, follow these steps:

1. Use an OBD-II scanner to confirm the DTC and check for any related codes.
2. Inspect the DPF for physical damage or excessive soot buildup.
3. Check for intake air leaks by inspecting hoses and connections.
4. Test the MAF sensor for proper operation and cleanliness.
5. Examine the exhaust pressure sensor and its connections.

How to fix DTC PP2002 on Audi step-by-step instructions

To fix DTC PP2002, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and clean or replace the MAF sensor if dirty or faulty.
3. Repair any intake air leaks found during the diagnosis.
4. Perform a DPF regeneration process to clear soot buildup.
5. Replace the DPF if it is damaged or excessively clogged.
6. Recheck for any DTCs after repairs and ensure the check engine light is off.

How to erase DTC PP2002 on Audi

To erase DTC PP2002, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the DTC menu on the scanner.
4. Select the option to erase or clear the codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the engine to ensure the check engine light is off.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.