U0073 – Audi DTC

Audi DTC U0073 – A faulty control module, A problem with the CAN bus

DTC U0073 meaning on Audi

DTC U0073 indicates a communication issue within the Controller Area Network (CAN) bus in Audi vehicles. This code signifies that one or more control modules are not communicating properly with each other, which can lead to various operational problems. The CAN bus is essential for the exchange of information between different electronic control units (ECUs) in the vehicle.

Audi DTC U0073 symptoms

Common symptoms associated with DTC U0073 may include:

• Warning lights on the dashboard, such as the check engine light
• Malfunctioning electronic features, such as power windows or locks
• Loss of communication with certain control modules
• Erratic behavior of vehicle systems, such as stability control or traction control
• Difficulty starting the vehicle

Audi DTC U0073 causes

Several factors can lead to the occurrence of DTC U0073, including:

• Faulty control module(s) that are not responding
• Wiring issues, such as damaged or corroded connectors
• Short circuits or open circuits in the CAN bus wiring
• Interference from aftermarket electronic devices
• Software glitches or outdated firmware in the control modules

Audi DTC U0073 seriousness

DTC U0073 is considered a serious issue as it can affect the overall functionality of the vehicle. If left unaddressed, it may lead to:

• Increased risk of vehicle malfunction
• Potential safety hazards due to failure of critical systems
• Higher repair costs if the problem worsens
• Inability to pass emissions tests

How to diagnose DTC U0073 on Audi

To diagnose DTC U0073, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC U0073.
2. Check for any additional DTCs that may provide more context.
3. Inspect the wiring and connectors related to the CAN bus for any visible damage.
4. Test the affected control modules for proper operation.
5. Verify the integrity of the CAN bus signal using a multimeter or oscilloscope.

How to fix DTC U0073 on Audi step-by-step instructions

To fix DTC U0073, follow these steps:

1. Identify and repair any damaged wiring or connectors in the CAN bus.
2. Replace any faulty control modules that are not communicating.
3. Update the software or firmware of the control modules if necessary.
4. Clear any interference from aftermarket devices that may affect communication.
5. Recheck the CAN bus signal to ensure proper communication is restored.

How to erase DTC U0073 on Audi

To erase DTC U0073, perform the following steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Access the diagnostic menu and select the option to clear DTCs.
3. Confirm the action to erase the codes.
4. Disconnect the scanner and start the vehicle to check if the code reappears.
5. Monitor the vehicle’s systems to ensure proper functionality.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.