BMW DTC P0090 – Fuel Pressure Regulator 1 Control Circuit/Open
DTC P0090 meaning on BMW
The Diagnostic Trouble Code (DTC) P0090 for BMW indicates a fault in the fuel pressure regulator 1 control circuit. This code is triggered when the Engine Control Module (ECM) detects an open circuit or a lack of communication from the fuel pressure regulator control circuit.
BMW DTC P0090 symptoms
Symptoms of DTC P0090 on a BMW may include:
- Check Engine Light (CEL) illuminated on the dashboard
- Engine running rough or misfiring
- Decreased fuel efficiency
- Engine stalling or hesitation during acceleration
BMW DTC P0090 causes
Common causes of DTC P0090 on a BMW include:
- Faulty fuel pressure regulator
- Open or short circuit in the fuel pressure regulator control circuit
- Corrosion or poor connections in the wiring harness
- Defective Engine Control Module (ECM)
BMW DTC P0090 seriousness
Ignoring DTC P0090 on a BMW can lead to potential engine performance issues and decreased fuel efficiency. It is recommended to address this code promptly to prevent further damage to the vehicle.
How to diagnose DTC P0090 on BMW
To diagnose DTC P0090 on a BMW, a mechanic may perform the following steps:
- Use a diagnostic scanner to retrieve the fault codes stored in the ECM
- Inspect the fuel pressure regulator and its control circuit for any visible damage or corrosion
- Check the wiring harness for continuity and proper connections
- Test the fuel pressure regulator for proper operation
- Verify the ECM functionality by checking other related sensors and circuits
How to fix DTC P0090 on BMW
To fix DTC P0090 on a BMW, the following steps may be taken:
- Replace the faulty fuel pressure regulator if it is determined to be the cause
- Repair any open or short circuits in the fuel pressure regulator control circuit
- Clean or replace any corroded connectors in the wiring harness
- If the ECM is faulty, it may need to be replaced or reprogrammed
How to erase DTC P0090 on BMW
To erase DTC P0090 on a BMW, the fault codes can be cleared using a diagnostic scanner. After the necessary repairs have been made, the ECM can be reset to clear the code and turn off the Check Engine Light. It is important to ensure that the underlying issue causing the fault code has been resolved before clearing the code.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.