P00A4 – BMW DTC

BMW DTC P00A4 – Charge Air Cooler Temperature Sensor Circuit Intermittent/Erratic (Bank 2)

DTC P00A4 meaning on BMW

The Diagnostic Trouble Code (DTC) P00A4 for BMW refers to the Charge Air Cooler Temperature Sensor Circuit Intermittent/Erratic issue on Bank 2. This code indicates a problem with the charge air cooler temperature sensor circuit, specifically on the second bank of the engine.

BMW DTC P00A4 symptoms

Symptoms of the BMW DTC P00A4 may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Reduced engine performance or power
• Engine running rough or misfiring
• Decreased fuel efficiency

BMW DTC P00A4 causes

Common causes of the BMW DTC P00A4 include:

• Faulty charge air cooler temperature sensor
• Wiring or connector issues in the sensor circuit
• Intermittent sensor signal disruptions

BMW DTC P00A4 seriousness

The DTC P00A4 on a BMW should not be ignored, as it can lead to potential engine performance issues and decreased fuel efficiency. While the vehicle may still be operable with this code present, it is recommended to address the underlying problem promptly to prevent further damage.

How to diagnose DTC P00A4 on BMW

To diagnose the DTC P00A4 on a BMW, you can follow these steps:

1. Use an OBD-II scanner to retrieve the specific fault code and verify it is P00A4.
2. Inspect the charge air cooler temperature sensor and its wiring for any visible damage or corrosion.
3. Check the sensor’s resistance and voltage output using a multimeter to ensure it is within specifications.
4. Perform a visual inspection of the sensor circuit components for any loose connections or broken wires.

How to fix DTC P00A4 on BMW

To fix the DTC P00A4 on a BMW, you can try the following solutions:

1. Replace the charge air cooler temperature sensor if it is found to be faulty.
2. Repair or replace any damaged wiring or connectors in the sensor circuit.
3. Clean any corrosion or debris from the sensor connections to ensure a proper electrical connection.
4. Clear the fault code using an OBD-II scanner after completing the repairs.

How to erase DTC P00A4 on BMW

To erase the DTC P00A4 on a BMW, follow these steps:

1. Ensure the underlying issue causing the fault code has been resolved.
2. Use an OBD-II scanner to clear the fault code from the vehicle’s memory.
3. Start the engine and verify that the Check Engine Light is no longer illuminated.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.